OptiChemi 600 Camera Installation and User Instructions UVP, LLC 2066 W. 11th Street Upland, CA 91786 Phone: (800) 452-6788 Fax: (909) 946-3597 Ultra-Violet Products Ltd Unit 1, Trinity Hall Farm Estate, Nuffield Road, Cambridge CB4 1TG UK Phone: +44(0)1223-420022 Fax: +44(0)1223-420561 Web Site: www.uvp.
OptiChemi Camera 2 Introduction The highly sensitive, cooled CCD OptiChemi™ 600 Camera is designed for use with UVP’s BioSpectrum® Imaging System and ChemiDoc-It® Imager. This instruction manual covers assembly of the camera to the BioSpectrum and ChemiDoc-It darkrooms, installation of software and use of the camera with the BioSpectrum and ChemiDoc-It.
OptiChemi Camera 3 Components Camera Kit The camera kit includes a motorized lens or which may or may not include zoom capabilities. Refer to the packing slip or installation components list for a complete inventory of included parts. • • • • • • • OptiChemi 600 Camera Cables Camera power supply Motorized lens Brackets/screws for each lens Back focus rings (Note: Back focus rings may not be required for your camera. If no rings are needed, there will not be any rings shipped with your order.
OptiChemi Camera 4 Installation The camera kit assemblies attach the OptiChemi 600 to the BioSpectrum Imaging System and ChemiDoc-It Imager. The camera is controlled by VisionWorksLS software. Refer to the BioSpectrum or ChemiDoc-It manual for additional system information and the VisionWorksLS Software Manual or Help Files for software information.
OptiChemi Camera 5 ChemiDoc-It from another camera type to the OptiChemi 600 camera, all power supply parts will be visible. In this case, the power supply cord must be plugged into a wall outlet. • Insert Ethernet Cable (9) into the camera and other end into the Ethernet Adapter. • Once the software is installed, connect the USB cable extending from the Ethernet Adapter into an available port on the computer.
OptiChemi Camera • 6 Under the general tab select "Internet Protocol (TCP/IP)" and left click the "Properties" button. Enter the following information: • IP address: 192.168.1.1 • Subnet Mask: 255.255.255.0 • Default Gateway: 192.168.1.117 • Leave the DNS entries blank **** NOTE: Write down the old settings before you change your TCP/IP properties if you will need to restore these settings at a later date **** • Select "OK" twice to return to the desktop.
OptiChemi Camera 7 Accessories and Replacement Parts To order accessories or replacement parts, contact UVP’s offices listed under Technical Support. Technical Support UVP offers expert technical support on all of its products. If you have any questions about the product’s use, operation or repair, please contact UVP’s offices at the locations below. Note: A Returned Goods Authorization (RGA) number must be obtained from UVP’s Customer Service prior to returning any product.
