Technical information

Dive-mode:
Activation: automatically at depth of about 2 ft.
In dive-mode, all diving functions are monitored, i.e. depth and dive time displayed, maximum depth sto-
red, saturation of tissues calculated depending on workload and temperature, no-stop time or decom-
pression prognosis determined, ascent rate controlled and displayed and the correctness of the decom-
pression procedure supervised.
The set percentage of oxygen or the oxygen fraction of the premixed gas – determined by the Oxy2 – is
displayed at the beginning of a dive until maximum depth is reached, but in any case for the first 5 minu-
tes of the dive.
Wait-mode:
Activation: automatically on reaching the surface
The wait-mode is activated if the the diver surfaces (diving depth less
than 2 ft). At the surface, the dive is not completed and entered into
the logbook for an interval of 5 minutes.
This allows the short surfacing for orientation or tank exchange.
During the 5 minutes waiting time, the portion of oxygen in alteration
with maximum depth is displayed.
30
3 Dive Computer
II Uwatec
®
Aladin
®
Air Z O
2
depth dive time
max. depth deco info
O
2 2
% MIX% MIX
tank data
bar
%
tank data
psi
ft
depth dive time
max. depth deco info
DECOSTOP
O
2
% MIX
%
CNS O
2
LIMIT
tank data
bar
%
tank data
psi
depth dive time
max. depth deco info
depth dive time
max. depth deco info
O
2
% MIX
O
2 2
% MIX% MIX
tank data
psi
tank data
bar
%