Technical information

IV Diving at Reduced Risk with Aladin

Pro

• Always make the deepest dive of the day first when repetitive dives are planned, and for each successive

dive make sure that the deepest portion of that dive is done at the beginning of the dive.

• The Aladin

Pro is designed for dives made with compressed air only. Do not use the Aladin

Pro for dives

made with nitrox or other mixed gases.

• All divers using dive computers to plan dives and indicate or determine decompression status must use

their own diving computer.

• On any given dive, both divers in a buddy pair must follow the most conservative dive computer for that

particular dive.

• If the Aladin

Pro fails at any time during the dive, the dive must be terminated, and appropriate surfacing

procedures should be initiated immediately.

• You should not dive for a period of twenty-four hours before activating the Aladin

Pro to use it to plan or

control your diving.

• You MUST follow the ascent rates as indicated by the Aladin

Pro and if the computer should fail for any

reason, you must ascend at a rate of no greater than 60 feet per minute.

1. Diving at Reduced Risk with Aladin

Pro