User manual

13
English
ALADIN SQUARE USER MANUAL
By pressing right you will get to next sub
display that shows surfacing time and
average depth:
1.0.14 Checking the battery status
The battery status menu shows how much
energy is left in the CR2450 battery. A fresh
battery shows high.
Square is periodically measuring the
battery status and you can manually trigger
a measurement by pressing SEL in battery
status menu.
The intelligent battery algorithm will limit
some functions towards the end of the
lifetime. See the table below for the status
and functions.
Indicator in
battery status
display
Battery status Function
limitations
High Fresh battery none
Medium Battery ok for
diving
none
Low Weak battery,
change to fresh
Acoustic alarms
and Backlight
not operating,
diving not
recommended

NOTE: The battery capacity and voltage
at the end of the lifetime may vary
between battery manufacturers. Generally
operation at low temperatures decreases
the battery capacity. Therefore, when the
battery indicator drops to Low, change
the battery to a fresh one before next dive.
1.0.15 Settings
By pressing SEL at the Set menu (and if
settings lock is deactivated) you come to
time set selection.
If the setting lock is activated Square will
request the lock pin number before the
settings can be edited.