User manual

14
ALADIN SQUARE USER MANUAL
1.0.16 Settings Lock
Square is delivered with factory settings for
easy start on normal air diving. As a default
the setting lock is deactivated. If you wish
to lock the settings for example to prevent
the value changes for rental use then the
lock can be activated at settings main
menu by selecting Code on and giving a
personal 3 digit pin number.
By pressing left after selecting the set menu
the code off is shown. By pressing SEL the
state on or off starts blinking and you may
change this by pressing right or left.
By pressing SEL you will confi rm the setting.
If you enabled the code the next page will
appear blinking the fi rst digit. By pressing
right or left you may select any number
between 0 and 9. By pressing SEL the fi rst
digit is set and next digit starts blinking.
After the 3rd digit is confi rmed by pressing
the SEL the code will be set.

NOTE: At battery change the lock pin
number will be reset and lock will be
deactivated.