User manual

17
English
ALADIN SQUARE USER MANUAL
1.0.23 Setting the sound mode
(silent modes)
By pressing the SEL at the sound menu one
of the following options start blinking and
they can be scrolled by pressing right or left:
All on = All audible functions are enabled
Warn on = Warnings, Alarms are enabled
Alr on = Alarms are enabled
All off = All audible functions are disabled
By pressing SEL you will confi rm the
setting. In case you want to activate All off
mode (silent mode), the Square will request
the safety pin code.
The text code (enter to continue) will appear and
the fi rst digit of the code will start blinking. By
pressing right or left buttons the number can be
edited and by pressing SEL button the number
is confi rmed and next number starts blinking.
The unlock code for sound off is: 313.

NOTE: the all off selection will disable
all audible dive mode alarms and
warnings. This is potentially dangerous.

NOTE: the only exception to the silent
operation is the alarm clock, it will
alarm when activated even if main
setting is: All off.
1.0.24 Setting the user preferred units
The user may select between depth and
temperature unit combinations. The effect
takes place in dive mode, in the log book,
alarm settings, altitude settings etc.
By pressing SEL in this menu the depth unit
selection starts blinking. By pressing right
or left buttons the value can be changed
between meter and feet. By pressing SEL
the temperature fi eld starts blinking. Again,
by pressing right or left the value may be
changed between °C or °F. By pressing
SEL button both unit settings will be
confi rmed.
1.0.25 Setting the Backlight on
duration
By pressing SEL on this menu the backlight
duration at middle row right starts blinking.
By pressing right or left you may scroll
between values:
• time 4,6,8,10,15,20,25,30,40,50,60
seconds
• “--“ OFF backlight deactivated
The selected value will be confi rmed by
pressing SEL.