User manual

18
ALADIN SQUARE USER MANUAL
1.0.26 Deactivating the water contacts
By pressing SEL on this menu the selection
on or off at the bottom row starts blinking. By
pressing right or left you may select between
active or inactive water contacts. You may
confi rm the selection by pressing SEL again.

NOTE: by selecting water contacts off
you may delay your dive start time up
to 1 minute. However, with inactive
water contact you prevent you Square
from switching to dive ready mode
when moisture for example at your
gear bag would accidentally activate
the water contacts.
1.0.27 Checking the device ID
Every Square has an individual ID
number. 10 digits are shown in this
menu. This number is used for secure
coding your log book and other
communication with PC/MAC.
By pressing SEL in this screen the Square
will show all the display segments for 3
seconds and returns showing ID after that.