User manual

25
English
ALADIN SQUARE USER MANUAL
1.4 Apnea Settings
Apnea diving related selections are grouped in this menu.
Surface
Inteval
alarm
Dual Depth
alarm
Depth
Incremental
alarm
Dive Internal
alarm
Low HR
alarm
Ascent
Speed
Alarm
Water
Density
Set Apnea
ESC
SEL
R
R
RRRRR
LLL
LLLL
By pressing the SEL button the following
menu’s can be accessed.
1.4.1 Setting the dual depth alarm
By pressing the SEL at this menu the fi rst
depth starts blinking. By pressing right/
left buttons you may select the fi rst depth
alarm from 5 to 100 meters (20..330 feet).
By pressing SEL the fi rst value is confi rmed
and the second alarm starts blinking. Like
the fi rst, by pressing right or left buttons
the second alarm may be set from 5 to 100
meters. By pressing SEL the function starts
blinking and you may select between on or
off by pressing right or left. By pressing SEL
the settings are confi rmed.

NOTE: The  rst alarm is short
sequence for attention and the second
alarm is continuous. By setting the  rst
alarm deeper than the second, it will
be masked by the continuous alarm
and you cannot hear the  rst one.
1.4.2 Setting the depth
incremental alarm
By pressing the SEL in this menu the
incremental depth alarm starts blinking.
By pressing right or left you may select the
alarm value from 5 to 100 meters (20..330
feet). By pressing SEL the alarm value
will be confi rmed and the function at the
bottom row starts blinking. By pressing
right or left you may select the direction for
the depth incremental alarm: off, dn(down),
up or both. By pressing SEL the settings
are confi rmed.