User manual

26
ALADIN SQUARE USER MANUAL
1.4.3 Setting the dive time interval
alarm
By pressing SEL at this menu the dive time
interval alarm starts blinking. By pressing
right or left you can select the interval from
15 seconds up to 10 minutes in 15 second
steps. By pressing SEL button the function
starts blinking and you may select on or off
by pressing right or left. By pressing SEL
the settings are confi rmed.
1.4.4 Setting the surface interval
alarm
By pressing SEL button at this menu the
surface interval time starts blinking. By
pressing right or left you can select the
interval from 15 seconds up to 10 minutes.
By pressing SEL button the function
blinking and you may select on or off by
pressing right or left. By pressing SEL the
settings are confi rmed.
1.4.5 Setting the low Heart Rate
limit alarm
In apnea diving a low heart rate is a key for
low oxygen consumption and therefore for
longer dives. However, too low of pulse at
depth may lead to loss of awareness and
can be therefore dangerous.
By pressing SEL at this menu the low heart
rate alarm value starts blinking. By pressing
right or left you can set the value from
25 to 100 beats per minute. By pressing
SEL button the function starts blinking.
By pressing right or left you may select
between on or off. By pressing SEL the
settings are confi rmed.
1.4.6 Setting the Ascent speed alarm
By pressing SEL at this menu the ascend
speed starts blinking. By pressing right or
left you may select the value from 0.1 to
5.0 meters/second (1..15 feet/second). By
pressing SEL the function starts blinking.
By pressing right or left you may select
between on or off. By pressing SEL the
settings are confi rmed.