User manual

44
ALADIN SQUARE USER MANUAL
Alternative information can be selected by
pressing right button. The information can
be scrolled in following order:
1. Sequential dive number
2. Heart rate (if activated)
3. SQUARE
ACCESSORIES
3.1 HR belt
Square receives the signal of the various
low frequency heart rate belts, for example
Polar or Scubapro belts. The position to
wear a HR belt is shown below.
Adjust the strap so that it is comfortable to
wear but so that it holds on the place.
When using a diving suit the HR belt must
be directly against the skin.
Moisten the electrode areas if your skin is
dry or when using a dry suit.
You must enable the heart rate setting on
your Square, refer to chapter Set HR limits
(Workload settings) of how to do this.
After a dive rinse the heart rate belt in fresh
water, dry it and store on a dry place.
With completely sealed HR belts the battery
cannot be changed.
We recommend having the battery change
by authorized SCUBAPRO Uwatec dealer
for the HR belts with a battery cap.
Check the operation conditions and depth
rating of the HR belt from the unit or its
package.