User manual

45
English
ALADIN SQUARE USER MANUAL
4. SQUARE PC
INTERFACE
4.1 Shark
The communication between Square and
PC/Mac is possible only with a Shark.
The communication between the Square
and the Shark is established via the
contacts on the case bottom. Therefore if
the water contacts or the spring contacts
of the cradle have dirt on the surface, this
should be cleaned with a piece of clothing
before use.
4.2 Introduction to
SCUBAPRO LogTRAK
LogTRAK is the software that allows
Square to communicate with a Windows-
based PC or Mac OS.
In order to take advantage of any of
these features, you need to establish a
communication between your PC and
Square with a cradle.
To start the communication
1. Connect the Shark to your PC
2. Launch LogTRAK on your PC
3. Connect the Shark to your Square
4. Confi rm the connection at Square
by pressing right, the successful
connection is indicated by a light on
the Shark.
5. Select USB device Square
Extras -> Options -> download
4.2.1 Download dive profi les
From LogTRAK, by selecting Dive ->
Download Dives you can transfer the
Square Logbook to your PC or Mac.
There are three main views each
showing a specific part of your dive logs:
Profile showing the graphical data of the
dive.
Details about the dive, where you can
edit for example the equipment and tank
information.
Location, which shows your dive site at
the world map.
The selection tabs for views are on the top
of the main window.