User manual

8
ALADIN SQUARE USER MANUAL
By simply pressing buttons right or left
from the time of day display you can scroll
through the various menus in SQUARE.
The chart above shows the sequence of
the menus. Note that when you fi rst reach
a menu, you are “outside” of it. You must
press SEL to enter the actual menu.

NOTE: When Square has wet contacts
activated and they detect moisture in
between, the Square goes automatic
to Surface display.
1.0.6 Surface display
When you have not been diving with your
Square for a while (no desaturation left)
the surface mode may appear as shown
below, indicating settings like the operation
mode (scuba, gauge, apnea), water type,
heart rate, MB level and gas mix:
After a dive the display may appear
as shown below, indicating maximum
allowed elevation where diver may ascent,
desaturation time and no repetitive dive
symbol (too short interval):
1.0.7 Surface interval counter
After a dive you can check your surface
interval by pressing SEL at the surface
display. The text Int and a time appears
to the display. The surface interval counter
counts until desaturation is complete, after
that this display cannot be selected.
1.0.5 Square operation
The diagram below shows the main menu logic in a chart form. The diving functions are
described detailed at chapter Square as a dive computer.
TIME & DATE
+ no dive / fl y
symbols (during
desaturation)
Press SEL will
switch
Square off
DESAT
(until
complete)
Surface
Interval
DIVE SET
summary
LOG
Logbook
pages
Planner
Check
battery
Altitude
meter
Set
menu
Set dive
ID
number
Set time
Menu
lock
Dive
settings
Clock
settings
R
ESC
ESC
ESC
ESC
ESC ESC
SEL
SEL
SEL
SEL
SEL SEL
RRRRRRR
RR
R
R
LLLLLLL
LLLL
L
Planner
pages
The reference point for any description of Square is the main time of day display. This is
the display that appears after waking the Square up from sleep mode by pressing the right
button and in which the current time and date are shown.