Technical information

3. Meridian as a dive computer
3. Meridian as a dive computer
25
English
SCUBAPRO MERIDIAN
3.2.4 Workload settings (pulse
limits)
By pressing SEL/ESC button in this menu
the Heart Rate (HR) high value starts to
flash. By pressing the +/UP or –/DOWN
button the value can be changed. By
pressing SEL/ESC button the low value
starts to flash. By pressing +/- the value
can be changed. By pressing SEL/ESC
again the mode starts to flash. Possible
selections are pulse or off. By pressing
SEL/ESC the mode will be entered.
When Pulse is selected then the diving
algorithm uses it as an input for the
workload. When Off is selected, then the
workload is disabled.
Heart rate high
value
Heart rate low value
Pulse
3.2.5 Desaturation reset
WARNING
Resetting desaturation will effect calculations
of the algorithm and this may lead to serious
injury or death. Do not reset desaturation
without a solid purpose.
When Meridian is still counting down the
desaturation, some menu changes are
not possible. In case the user decides to
reset the desaturation, the safety code 313
must be entered. This procedure secures
unwanted resetting and the desaturation
reset will be stored in the memory on the
next dive log the desaturation symbol will
be shown.
3.3 SCUBA settings
A set of SCUBA related selections are
grouped in this menu.
By pressing the SEL/ESC button the
following menu’s can be scrolled down.
3.3.1 Maximum dive depth alarm
By pressing SEL/ESC button in this menu
the depth value starts to flash. By pressing
the +/UP or –/DOWN button the value can
be selected between 5 and 100 meters
(20 to 330 feet) in 1m (5ft) increments.