Technical information

26
3. Meridian as a dive computer
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
By pressing SEL/ESC button the function
starts to flash and you may select On or Off
by pressing the +/UP or –/DOWN button.
The selection is confirmed by pressing
SEL/ESC button.
Alarm depth
Status
3.3.2 Maximum dive time alarm
By pressing SEL/ESC button in this menu
the time value starts to flash. By pressing
the +/UP or –/DOWN button the value can
be selected between 5 and 195 minutes
in 1 minute increments. By pressing SEL/
ESC button the function starts to flash and
you may select On or Off by pressing the
+/UP or –/DOWN button. The selection is
confirmed by pressing SEL/ESC button.
Alarm time
Status
3.3.3 Setting the Micro Bubble
level
By pressing SEL/ESC button in this menu
the Micro Bubble level starts to flash. By
pressing the +/UP or –/DOWN button you
may select personal settings from L0 up to
L5. L5 is the most conservative setting. The
selection is confirmed by pressing SEL/
ESC button.
Micro Bubble level
F
NOTE: more about diving with the MB
levels, read chapter: Diving with MB
levels.
3.3.4 Setting the Safety stop timer
Meridian safety stop timer starts
automatically when the depth at the end
of the dive becomes less than 5m/15ft and
all decompression or MB stops have been
accomplished.
By pressing SEL/ESC button at this menu
the number at the bottom row will start
flashing. By pressing the +/UP or –/DOWN
button the value can be set between 1 to 5
minutes or to Off.
Duration of the safety stop
3.3.5 Setting the user preferred
units
The user may select between depth and
temperature unit combinations. The effect