Technical information

3. Meridian as a dive computer
3. Meridian as a dive computer
27
English
SCUBAPRO MERIDIAN
takes place in dive mode, in the log book,
alarm settings, altitude settings etc.
By pressing SEL/ESC button in this menu
the style of units field value starts to flash.
By the +/UP or –/DOWN button the value
can be changed between meters/feet. By
pressing SEL/ESC button the temperature
field starts to flash. Again by pressing +/-
the value may be changed. By pressing
SEL/ESC button both unit settings will be
confirmed.
3.3.6 Selecting the salt (ocean) or
fresh water
Meridian measures a pressure and converts
depth from it by using the water density as
a constant. 10m/33ft depth at salt water
corresponds approximately to 10.3m/34ft
at fresh water.
By pressing SEL/ESC button at this menu
the on/off field at the bottom row starts to
flash. You may scroll between these two
settings and confirm by pressing SEL/ESC
button.
3.3.7 Setting the Backlight on
duration
By pressing SEL/ESC button on this menu
the backlight duration field at bottom row
starts flashing. By pressing the +/UP or
–/DOWN button you may scroll between
user presettable on time from 4 up to 60
seconds.
Status Backlight duration
3.3.8 Setting audible attention
signals on and off
With this option you can switch off the
audible attention signals only (the audible
alarms remain active). By pressing SEL/
ESC button on this menu the on/off field at
the bottom row starts flashing. By pressing
the +/UP or –/DOWN button you may
select between audible attention signals
On or Off. You may confirm the selection by
pressing SEL/ESC button again.