Technical information

1. Introduction to Meridian
1. Introduction to Meridian
7
English
SCUBAPRO MERIDIAN
is not recommended before changing the
battery.
Battery symbol
WARNING
Starting a dive when the battery symbol is
flashing can cause the dive computer to fail
during the dive! Replace the battery before
any diving activity if the flashing battery
symbol appears.
When the ‘do not dive symbol’ appears with
the battery symbol, Meridian can not be used
for diving before replaced with a new battery.
Do not dive symbol
Please refer to chapter 2.1.7 Checking
the battery status for details how to
check your Meridian battery status.
WARNING
Replacing the battery requires opening the
electronic compartment of Meridian. You
must take extreme care when performing
the battery change operation in order to
ensure the water seal of the watch. Failing
to do so will cause Meridian to flood during
your next dive and permanently damage the
dive computer. Damage to Meridian due to an
improper battery replacement is not covered
by warranty. We strongly recommend having
the battery change operation be carried out by
your authorized SCUBAPRO dive retailer.
See chapter 6.3 Replacing the battery in
Meridian for more information on how to
replace the battery.