User Manual

www.avaccess.com
6
Introduction
Receiver
No. Name Description
1 DC 12V DC 12V power input
2 HDMI Out Connect to an HDMI display device.
3 Optical In
Connect to the Optical Out port of the transmitter via a
duplex OM3 multi-mode optical ber cable.
4 RS232 For RS232 pass through
5 IR In
Connect to the supplied IR receiver. Secure the IR
receiver with adhesive.
6 IR Out
Connect to the supplied IR emitter. Secure the IR emitter
on the IR receiving sensor of display device with
adhesive.
7 Switch
Switch to RS232 or IR mode.
RS232: For RS232 pass through
IR: For IR pass through
21
7654
3