User Manual
www.avaccess.com
9
RS232 Pass Through
RS232 Pass Through
The RS232 ports provide a channel to pass through protocol commands to control
third party devices such as your source or display. Switch the panel DIP Switch
to RS232, and then connect RS232-enabled devices (such as a computer and a
projector) to the transmitter and receiver respectively via RS232 cables. Please
refer to the following pin deînition of RS232 during your installation.
Transmitter
Receiver
Switch to RS232 mode
Optical Fiber
Cable
Switch to RS232 mode
HDMI IN
HDMI OUT RS232 Cable
PC
RS232 Cable
Projector