User Manual

www.avaccess.com [e-mail]
7
Installation Instructions
Installation Instructions
Bi-directional IR pass through enables users to control the source at the
display location or control the display at the source location with ease.
Please refer to the following two applied installations.
Applied installation 1:
Control the DVD at TV location with DVD remote
DVD RemotePower supply
Transmitter 4KEX70-W
6
Connect the IR emitter
on the rear panel
Note: The IR emitter head
should be secured over
the center of the DVD IR
window.
PC
Connect the
VGA source
1
2
Connect the
HDMI source
Connect the transmitter and receiver
via a Cat 5e / 6 / 7 cable.
Note: Ensure the Cat 5e / 6 cable
is within 197ft at 1080P, 115ft at 4K.
3
7
4
5
Connect the
power
Connect the
HDMI display
Connect the
IR receiver
4KEX70-RX-PSE
DVD