User Manual

www.avaccess.com [e-mail]
8
Installation Instructions
Applied installation 2:
Note:
•
If the connected HDBT receiver doesn't include built-in PSE module,
please connect an external DC 12V power supply to the transmitter.
Power supply is not included in the package.
•
The IR emitter and IR receiver are not included in the package.
Control the TV at DVD location with TV remote
Transmitter 4KEX70-W
TV Remote
Power supply
6
PC
Connect the
VGA source
1
2
Connect the
HDMI source
Connect the transmitter and receiver
via a Cat 5e / 6 / 7 cable.
Note: Ensure the Cat 5e / 6 cable
is within 197ft at 1080P, 115ft at 4K.
3
4
Connect the
power
Connect the
HDMI display
4KEX70-RX-PSE
DVD
5
Connect the IR emitter
Note: The IR emitter head
should be secured over
the center of the TV IR
window.
7
Point the remote
at the IR Sensor
window