User Manual

www.avaccess.com [e-mail]
10
EDID Management
EDID (Extended Display Identication Data) is a data structure generated
by a digital display to communicate its capabilities, such as its native
resolution, to the attached source device.
For VGA input, fixed EDID can be set using the EDID DIP switch on the
front panel.
The default setting is "010", please set EDID according to the following
table:
Position 1 Position 2 Position 3 Functions
0 0 0 Output xed 1280 x 800 video
0 0 1 Output xed 1920 x 1200 video
0 1 0
Output xed 1920 x 1080 video
(Default)
0 1 1 Output xed 1280 x 720 video
1 0 0 Output xed1024 x 768 video
1 0 1 Output xed 800 x 600 video
1 1 0 Not available
1 1 1 Not available
Note: Please plug out and in the VGA cable for EDID settings to take
eect.
For HDMI input, 4KEX70-W transmitter will allow EDID pass-through from
the HDMI display to the source for optimal video and audio outputs.
EDID Management
1
1
0
2 3
ON
EDID DIP Switch