Specification Sheet

2
www.v-color.com.tw
Description
V-Color Registered DDR4 SDRAM DIMMs (Registered Double Data Rate Synchronous DRAM Dual In-Line
Memory Modules) are low power, high-speed operation memory modules that use DDR4 SDRAM devices. These
Registered SDRAM DIMMs are intended for use as main memory when installed in systems such as servers and
workstations.
FEATURES
 Power Supply: VDD=1.2V (1.14V to 1.26V)
 VDDQ = 1.2V (1.14V to 1.26V)
 VPP-2.5V (2.375V to 2.75V)
 VDDSPD=2.25V to 2.75V
 Functionality and operations comply with the DDR4 SDRAM datasheet
 16 internal banks
 Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or
different bank group accesses are available
 Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600
 Bi-Directional Differential Data Strobe
 8 bit pre-fetch
 Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
 Supports ECC error correction and detection
 On-Die Termination (ODT)
 Temperature sensor with integrated SPD
 This product is in compliance with the RoHS directive.
 Per DRAM Addressability is supported
 Internal Vref DQ level generation is available
 Write CRC is supported at all speed grades
 DBI (Data Bus Inversion) is supported(x8)
 CA parity (Command/Address Parity) mode is supported