User manual

Video File Format Sets the encapsulation codec used to record video on the
POV.HD.
Options: .mov
.mp4
Default: .mp4
Record Method Sets the method by which you control the recording and
tagging of video or capture of still photos.
Options: Clip
Loop
Loop & Forward
Still Photo
Default: Clip
Loop Record Time Sets the loop time used in Loop and Loop & Forward
recording. Loop Record Time is also used in In-field Editing.
Options: Selected values between 20 sec and 60 min
Default: 2 min
For more information, see Understanding the POV.HD
Recording Methods, in the next section.
Exposure Metering Sets the window within the frame that the auto exposure logic
uses for light metering.
Options: Full Frame
Spot
Default: Full Frame
Exposure Compensation Sets an offset to the dynamic exposure level the automatic
exposure logic determines for your video or still photo
recording.
Options: –3, –2, –1, 0, +1, +2, +3
–1, –2, –3 are the number of steps by which the exposure is
reduced.
0 applies no exposure compensation. The dynamic
exposure control values are used without adjustment.
+1, +2, +3 are the number of steps by which the exposure is
increased.
Default: Level 0 (no compensation applied)
Noise Filter Reduces or removes random video noise on each frame. Video
noise may consist of singular tiny “picks” of contrasting color or
general speckling especially of darker areas most often
encountered in very low light situations.
Options: ON/OFF
Default: ON
POV.HD User Manual
Using the Recorder
19