User manual

Power-off Timeout Sets the idle time required before the recorder shuts down.
Power-off Timeout will not occur while you are recording video
or during video playback. Any use of the soft keys or other
buttons on the recorder resets the Power-off Timeout timer.
Options: Never
selected values between 15 sec and 30 min
Default: Never
Alert Volume Sets the volume of alert sounds on the recorder.
Options: Off
Volume levels 1 - 9
Default: Level 5
Speaker Volume Sets the audio playback volume through the built-in speaker.
Options: Off
Volume levels 1 - 9
Default: Level 5
Remote Control ID Selects the ID to be used with your wireless remote. The
wireless remote can be set to ID’s 0 - 9 to allow multiple POV’s
to operate in the same vicinity.
The recorder and remote are both set to ID 0 out of the box.
Default: 0
Note: POV.1, POV.1.5, POV.T, and POV.HD all share the same
wireless remote ID channels, allowing any of these devices to
be used in the same vicinity if different ID’s are set on each
device.
Video Output Sets the format of analog output through the A/V port on the
recorder.
Options: NTSC or PAL
Default: NTSC
Time and Date Sets the POV system time and date which is used to designate
file creation time.
Format SD Card Formats the installed SD card.
Caution: This action erases all files on the SD card.
Update Firmware Installs a firmware update from the SD card. This setting is used
as part of the POV.HD firmware update process when updates
are made available by V.I.O.
Recorder Model Displays information about the recorder, firmware, and camera
head on the LCD.
Restore All Default Settings Returns all settings to their default values. This action does not
reset the system time and date.
POV.HD User Manual
Using the Recorder
21