To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.
Content Precaution...................................... 2 Automatic Memory Storing & Safety Information......................... 3 Program Scanning....................... 18 Disc Note....................................... 4 RDS function.................................. 18 Installation .................................... 5 Media Operation............................. 20 Electric Connection ...................... 7 Basic Operation .............................. 21 Remote Control ................
Precaution THANK YOU FOR PURCHASING A BOSS AUDIO MULTIMEDIA PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Note Disc formats supported by this player Digital Digital Video Video Audio and Video Disc size 12 cm VCD VCD Audio and Video Disc size 12 cm CD CD Audio Disc size 12 cm MP3 MP3 Audio Disc size 12 cm Discs which cannot be played with this player Digital Video-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation Installing the unit DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER CONSOLE PLAIN WASHER SLIDE BRACKET HOUSING TAPPING SCREW HEX BOLT TABS SCREWDRIVER KEY PLATE PLASTIC TRIM OUT KEY PLATE If you want to take the CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER on both sides , then insert the two KEY PLATES into the left and the right sides of the chassis as illustrated above.
Electric Connection WIRING CONNECTION RCH IN RED AUX2 SUBWOOFER GREY VIDEO OUT(2) YELLOW REAR CAMERA INPUT YELLOW AUX 2 VIDEO IN YELLOW LCH IN WHITE FRONT RCA OUTPUT CABLE REAR OUTPUT CABLE RCH RED FRONT RCA RED R VIDEO OUT YELLOW LCH WHITE FRONT RCA WHITE L RADIO ANTENNA JACK ISO CONNECTOR RED IGNITION SWITCH(B+) MEMORY BACK-UP(B+) KEY GROUND(BLACK) KEY 1(BROWN) KEY 2(WHITE) FUSE FUSE YELLOW GROUND(B-) AUTO ANTENNA FRONT LCH SPK. REAR LCH SPK.
Remote Control 2 1 1. OSD BUTTON 19 3 2. PROG BUTTON 3. LOUD BUTTON 4 4. NUMBER(0~ 9 )BUTTONS 37 36 5. C LOCK BUTTON 20 5 21 6 6. ANGLE/MO/ST BUTTON 22 7 7. LOC/SLOW BUTTON 23 8 24 9 8. STOP BUTTON 25 10 26 9. I<< BUTTON 27 10. SELECT BUTTON 11 28 11. VOLUME+/- BUTTONS 29 12 13 30 14 12. STEP/TEL BUTTON 31 13. SRC BUTTON 33 14. MUTE BUTTON 32 15 16 15. BAND BTTON 34 17 35 16. OK BUTTON 18 17. INT BUTTON 18. RPT BUTTON 28. POWER BUTTON 19. ANG BUTTON 29.
Remote Control Preparing the Remote Control Inserting the Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Basic Operation POWER ON/OFF Touch the “OFF” ICON on screen to turn the unit off . Press the“ ” onthe front panel to turn It on, press it again to turn off . FIG.2 LOADING/EJECTING A DISC Loading a Disc 1. Press the POWER ( ) button on the front panel to turn the device on . Adjusting the viewing angle .
Basic Operation When the monitor turns downward to a certain angle, it will draw in . FIG.6 Setup interface 1 Main Menu Operation ILLUMINATION COLOR In many modes, touch the icon or In DVD/VCD mode , touch the range to enter the main menu, the message like following as below. Setup interface 2 Touch the “ ” section on the setting menu, touch the “ / ” ranges to select the adjustment item, Touch the “ ” icon to return to the previous playback .
Basic Operation changes to the Parental Control menu below .) Key in “0000” and then turn to rating then you can setting as follow: KID SAFE -> G -> PG -> PG-13 -> PG R -> R ->NC-17 -> ADULT Disc setup as follow: DISC FORMAT NTSC TV TYPE 4:3PS RATING ADULT FORMAT This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select).
Basic Operation TREBLE: -7 to +7 Adjust treble level . LANGUAGE Touch to select OSD language. BASS: -7 to +7 Adjust bass level . ILLUMINATION COLOR Touch to select the backlight for all SUBWOOFER: touch to adjust subwoofer buttons. Tap auto icon the backlight change automatically. volume and frequency. CALIBRATION Touch the arrow as show to calibration USER -> JAZZ -> CLASSIC -> POP -> ROCK the display.
Control Panel UNIT KEYS 19 18 1 3 7 MIC 2 6 9 84 21 5 10 20 11 12 13 14 15 1716 1. OPEN BUTTON To slide the monitor out and stand it up or into the monitor slot, press this button; To adjust the angle of the monitor, press the 5/ or 6/ to change the angle for the TFT display. 2. SEL BUTTON and VOL KNOB In normal mode, the VOL knob is used to increase or decrease the volume.
Control Panel In BT mode, press the SEL to receive a call ,during talking,press the SEL to transfer audio between the Car Audio System and phone; press and hold the SEL to reject a call. 3. (POWER On/Off )/MODE Press it to turn on the unit, Press and hold for two seconds to switch the device off. In playback mode, Press it repeatedly to select RADIO, DISC, USB, CARD, BT, AUX and AV mode. 4 /5.
Control Panel B) In DISC/USB/SD mode During playing, press 1/>II button to pause the current playback, press again to to continue play; During playing, press 2/RPT button to select repeat function; During playing, press 3/RDM button to select random function; During DVD/VCD/CD disc playing, press 4/STOP button to stop playing and turn to home mode, during MP3/USB/SD mode, press this button to turn to previous mode, press again to turn to home mode; 17.
Touch Screen Operation RADIO OPERATION Listening to Radio Touch the RADIO ICON in home menu to enter the RADIO mode: 10:00 AM Briefly touch “ ” to decrease frequency by one step of channel spacing. Automatic Search During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.
Touch Screen Operation Automatic Memory Storing & Program Scanning 10:00 AM Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to active automatic station storage. The radio searches within the current frequency band, e.g. Fm 3 , for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Touch Screen Operation PI MUTE : the sound of another station is suppressed . TA Traffic Announcement (Priority For Traffic Information) In Radio mode, touch the cursor button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) .
Touch Screen Operation Media Operation In audio play mode, the message will display as below : (When Parking Brake is applied .) To skip the next track To skip the previous track 10:00AM Repeat Function Random Function Previous menu Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with bluetooth function). The icons for other mode (The same icon have the same function in each mode) In PHOTO playing ,tap to change the photo direction.
Touch Screen Operation BASIC OPERATION Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right . Stopping Play Touch the button on remote to stop the unit playback. press the button to start play.
Touch Screen Operation T 00 1/004 C 001 /00 1 FOR VCD : Press the INT button on the remote control. It display will following menu as below : SEQ PLAY INTR O 1 2. Example for VCD/SVCD, when it is on, it will display the information such as: Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .) FOR Digital Video/MP3 : For Digital Video/MP3 , press the INT button is not available . 3.
Touch Screen Operation FOR VCD (With PBC OFF) : Touch the screen as show or press the GOTO button on remote control; the screen will display the following message : Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
Touch Screen Operation Digital Video Special Function 1. Multi-subtitle Language Function (for Digital Video Only) 3. Multi-Angle Function (for Digital Video Only) During Digital Video playback. Touch the icon on touch screen(or press the SUBT on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order. During Digital Video playback, touch the icon on the touch screen .
Touch Screen Operation 5. A-B Repeat (for Digital Video and VCD) 3 Use the number button to input desired sequence number of title/ chapter/track with desired sequence. Press the A-B button if you want to repeat a specific segment on a disc that you define: 4 After input your favour, press >II on remote or use the direction buttons to select play and then press OK on remote to play the programmed titles/ chapters/tracks in programmed order. 1.
Touch Screen Operation Bluetooth Operation 1. Pairing and Connecting Prior to using the bluetooth device named Boss Audio as a hands-free system for a bluetooth-enabled mobile phone for the first time, you must pair and connect them as follows: * Prior to pairing and connecting, when displaying No Video interface of radio, CD, AUX IN or bluetooth music, the logo BT flashes in the touch screen.
Touch Screen Operation b. Use the number icons or buttons to input your desired phone number; * When inputting a wrong digit, use c. After finishing inputting, touch to dial out. icon or < button to delete it. icon or press button on control panel 2) Redial last dialed phone number Touch icon or long press redial button on remote control to dial out the last dialed phone number. 3) Answer a call During an incoming call, the incoming telephone number displays in the the BT PHONE interface.
Touch Screen Operation Mute function To select the Equalizer mode To decrease the volume level To increase the volume level Loudness Function Subwoofer Function Turning pre-switching for traffic announcements on and off Switching on and off an Alternative frequency Play/Pause the playing To skip the next track To skip the previous track Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with bluetooth function).
Touch Screen Operation AUX Operation 10:00AM On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the RCA
Touch Screen Operation AV Operation Please plug the RCA
Touch Screen Operation USB OPERATION Card OPERATION Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. The unit can support playback MP3/WMA/ JPEG/MP4 and Divx format which are stored on SD memory cards . Please read the following instructions before you start using a memory card .
Touch Screen Operation STEERING WHEEL CONTROL Touch the SWC icon as follow to turn to steering wheel control . When electric resistance is too low, touch this icon to increase. When electric resistance is too high, touch this icon to reduce. 10:00 AM During setting, touch the turn to home menu.
Parental Control * Parental Control Q: After inserting a Digital Video disc into the disc slot, if a dialogue box pops up and asks you to input a password, what should you do ? A: The playing disc is locked by a rating level of parental control.
Region Code for DVD * Region Code If you insert a disc into the disc slot and REGION ERROR is displayed, the car multi-media system can not play the disc. The reason is that the region codes of the car multi-media system and the used disc do not match each other. Appendix: Region code of D igital Video Motion Picture Association of America (MPAA) divided the world into 6 regions, and gave every region a region code for locking and unlocking D igital Video playback.
Specification General : Supply Voltage: Current Consumption: Signal System: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1.
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.