User Manual

STEP BY STEP GUIDE

a. To turn headphones on, press and hold the Power button for 3 seconds

b. The LED indicator will illuminate light blue if a device is paired

c. To turn headphones off, press and hold the Power button for 3 seconds until you

hear the Power Off sound

a. Ensure M-200 ANC is switched off, charged and within 1m of the device

b. Activate Bluetooth in the settings of your new device

c. Press and hold the Power button for 6 seconds until you hear the pairing sound

to turn the headphones on and enter secondary pairing mode (sonar sound)

ON/OFF

Before proceeding to the next step, make sure to follow the “GETTING STARTED”

instructions immediately above this section

PAIRING A SECOND DEVICE