User`s manual

Names of Parts and Functions

Front Panel

Rear Panel

Headphone output connector / optical audio (S/PDIF) output connector

• Connects to stereo headphones (mini plug) and to round optical digital sound

connectors. The iPhone‘s digital audio signal is output with DD (Digital-to-

Digital) conversion. By connecting to a device with a digital input connector,

the iPhone’s audio source can be dubbed or played over speakers in high

quality (48 kHz/16 bit) sound.

Volume knob

Adjusts the headphone volume.

Toggle switch

Sets the operation mode.

• : HEADPHONE AMP function on

•

: In addition to the AMP function, the VAMP internal battery

charges the iPhone .

• : Used to turn off the VAMP or sync with the computer and

charge the iPhone with a USB connection to the computer.

Mini-USB port

RESET switch

Resets and initializes the VAMP.

When resetting, set the ON/OFF switch to ON and then set it back to OFF.

* VAMP will not run if the switch is left to ON. Always return the switch to OFF.

* See Settings for more information about setting GAIN and RESET.

GAIN switch

Switches the headphone output gain between HI (high) and LO (low).