Manual

Product Information

CAT5 Accessories

C5-IPC

DESCRIPTION FEATURES

CAT5 system IP network converter

150mm

140 mm

60 mm

DIMENSION

► Only one C5-IPC is required in one block.

► Built-in watchdog circuit in case of crash.

► LED Indicators to show system status

► RJ45 Standard connection port

► IP address setting & store

► Support TCP/IP network a n d fiber

transmission or broadhand network

access.

► Adopt MPEG4 video protocol and G.729

audio protocol.

► Include 100Mbit Ethernet LAN and RS485

connection port.

PAGE 1
Product Information CAT5 Accessories C5-IPC DESCRIPTION FEATURES CAT5 system IP network converter ►► Only one C5-IPC is required in one block. ►► Built-in watchdog circuit in case of crash. ►► LED Indicators to show system status DIMENSION ►► RJ45 Standard connection port ►► IP address setting & store 60 mm ►► S u p p o r t T C P / I P n e t w o r k a n d f i b e r transmission or broadhand network access. ►► Adopt MPEG4 video protocol and G.729 audio protocol.
PAGE 2
1. Parts and Functions ** PA: Reset button. Press and hold for 3s to initialize C5-IPC; If initialization complete successfully, power off, and re-power C5IPC, LINK&IN-USE indicators will flicker once simultaneously, then INK indicator will flicker till IN-USE indicator is always ON JTAG S1 POWER PA VR600 LINK IN-USE ** S1: DIP Switch. Refer to DIP Switch Setting ** JTAG: PC Port. Update C5-IPC program by PC that is connected by RS232 convertor ** RS485: PC Port.
PAGE 3
. Specification ** Power input: DC 24V ** Standby Current: 230mA ** Working Current: 330mA ** Video Signal: CCIR, 1Vp-p, 75Ω ** Audio Signal: 300~3,400 KHz, 0~240 mV ** Transmission Mode: TCP/IP ** Connection Port: RJ45 ** Network Interface: Standard Ethernet interface ** Working temperature: -10ºC ~ +40ºC ** Dimension: 140(H)×150(W)×60(D)mm 4. Ordering Information Model No. Brief Description Remark C5-IPC IP Converter IP network solution 5.