User guide

Date and Time set
Monitor Time settig
Touch User Setup item on main menu page to enter
setup page, then touch Clock item, input digitals by
pressing the digital keypad. Y->Year, M->month,
D->Date, W->week, H->Hour, M->Minute,
S->Second.
Press icon to cancel the setting location,and
press icon to save. Settings will be performed
immediately, press icon to return last page .
Note: the date and time setting is valid only when the
system connect SC6M module.
Touch User Setup item on main menu page to enter
setup page, then touch Monitor Time icon to
enter monitor time setting page.
Input digitals by pressing the digital keypad, setting
range is 6~600. press icon to cancel the setting
location,and press icon to save. Settings will be
performed immediately, press icon to return last
page .
Ring Volume and Night Ring Volume Setting
You can set a ring volume for day time and night
time individually, 6:00 AM~18:00 PM is the day
time and 18:00 PM~6:00 AM is the night time by
default,if you don't want to be disturbed at night,you
can set the night ring volume to 0.
Touch User Setup item on main menu page to enter
setup page,then touch
Ring Volume
or
Night Ring
Volume
item. then touch / icon to increase
/ decrease the value; After nish, touch icon to
save and exit.(touch icon to cancel the setting
and return last page)
5
Y---- M-- D--
-6-