English VIDEO INTERCOM SYSTEM USER MANUAL ＳＯＳ IP-G21 Version 1.
1.Parts and Functions Handset ＳＯＳ LCD Screen Microphone Alarm Button Speaker Unlock Button Call Button Handset Line LED Indicator Dimension:220(H) x 358(W) x 35(D)mm Key functions: Microphone Receives sound from the user. LCD Screen Display the icon menu and images .Touch operation. Alarm Button Flash when the guard unit receives alarm record. 1. Red indicator flash first, green indicator flash later when power on. LED Indicator 2. Blue indicator ormally on when work in normal. 3.
2.Specification Power supply: DC 14~30V Power consumption: Standby 6W; Working status 13W Working temperature: -100C~550C Alarm record: 1000 pieces Calls record: 600 pieces Screen: 10 inch digital TFT LCD Video signal: 1Vp-p, 75Ω, CCIR standard Wiring: CAT5 cable Dimension: 220(H) x 358(W) x 35(D)mm 3.About Main Menu The Main menu is your starting point for using all the applications on the guard unit. To open the main menu page, touch the LCD screen anywhere twice. 4.
Answer calls from common door station • The operation is the same as calling from door station. Answer calls from users • Select "Direct call guard unit" on monitor to call Guard Unit.(please refer to monitor user manual for more detail information) • The Guard Unit rings,and the red LED indicator flash, the address of the monitor will be shown on screen.Note that the screen will be turned off in limited time if nobody answers • If the guard person answers the call ,talking with user is available.
User alarms to Guard Unit • Select "Call Guard Unit" on monitor to alarm guard unit.(please refer to monitor user manual for more detail information) • The Guard Unit will send out a soud of buzzer and the alarm button will flash in red when receives alarm signal. At the same time, the address of the monitor will be shown on screen. The latest alarm record will be displayed on first item.
current monitor. • If the user answers the call,the guard person can talk with the user immediately. • The system will cut off automatically if exceeds the maximum calling waiting time in calling state or exceeds maximum talking time in talking state. Checking all calls record • On main menu page of Guard Unit,touch " Event->Missed calls ",all calls that has not been answered will be shown .
6.Settings Ring tone setting • User call tone, door station call tone,GL call tone can be set different ring tone to distinguish different calling • Touch "User Setup" icon on main menu page, then touch "Call Tone Setup", total 6 pieces ring tones will be displayed • Touch "Ring Type" icon to switch to set User call tone, door station call tone,GL call tone • Touch "Louder Volume" to select a louder ring tone volume.
7.Built-in Memory and SD Card The Guard Unit has been equipped with a built-in memory (about 120 MB) together with a SD card reader. Maximum 16 GB SD card can be supported. ＳＯＳ SD card Picture recording Both auto recording and manual recording are available.and auto recording is default. If receive a call , after a moment, the guard unit will record automatically. one picture will be taken for each calling.or you can touch Capture icon to record the visitor's image manually.
• Avoid to plug in/out the SD card when the guard unit is under operation. • Playing will be interrupted by the calling. 8.Screen and Volume Adjustment During monitoring or talking, touch ADJUST icon, then touch and select the adjustment item you want; touch / icon to decrease / increase the value. • The Scene mode selection: Total 4 screen modes can be selected in sequence: Normal, User, Soft and Bright. Whenever you modify Brightness or colour, Scene item will be set to User mode automatically.
Please read this manual carefully before using the product you purchase, and keep it well for future use.We reserve the right to modify the specification in this manual at any time without notice.
