User's Manual

12 Trouble-shooting
▸ Close the appliance door.
▸ If the appliance is switched off: first press the adjusting knob.
▸ Press the touch button.
▸ Select .
▸ Select the degree of soiling.
– The calculated end time for the pyrolytic self-cleaning process is shown in the dis-
play above .
▸ To start the pyrolytic self-cleaning process, select .
– The appliance door locks.
Delayed start
The start of pyrolytic self-cleaning can be delayed, for example, to take advantage of
lower electricity tariffs.
▸ Select before starting.
▸ Set the desired end time.
▸ Select .
– The appliance remains switched off until the calculated automatic start.
Cancelling
▸ Select in the display.
– Pyrolytic self-cleaning is cancelled.
▸ The residual heat appears in the display.
▸ The appliance door remains locked until the temperature drops below 300°C.
End
The appliance door cannot be opened until the temperature has dropped below 300°C.
▸ Wait until the appliance has cooled to hand warm to remove any residue left behind
using a soft cloth dampened with water. Do not use cleaning agents.
12 Trouble-shooting
12.1 What to do if …
This section lists faults that can be solved simply by following the instructions given. If
another fault is displayed or the fault cannot be remedied, please call Customer Ser-
vices.
Before calling Customer Services, please note down the error message in full.
Fxx/Exxx see operating instructions
FNxxxxx xxxxxx.
41