User Manual

5 User settings
Factory settings
Settings that have been changed can be
restored to V-ZUG-Home factory settings.
5.12 Appliance information
The model, article number, serial number
(FN) and service contact information can
be found under «Info».
Information about the hardware and soft-
ware can be found under «HW» and «SW»
respectively. «Lib1» and «Lib2» are soft-
ware libraries.
▪ Information:
▪ HW
▪ SW
▪ Lib1
▪ Lib2
5.13 EcoManagement
Consumption indicator
When enabled, this function indicates how
much energy (kWh) the entire hob uses
from the moment it is switched on to the
moment it is switched off.
▪ On
▪ Off (factory setting)
Consumption information
Total and average consumption values as
well as consumption since the appliance
was last switched on are displayed (see
page 20). All consumption values can be
reset. The last time the consumption data
was reset is also displayed.
▪ Total consumption
▪ Average consumption
▪ Consumption since being switched on
▪ Last reset
5.14 Factory settings
User settings that have been changed
can be restored to factory settings. The
following user settings cannot be re-
stored:
▪ Language
▪ Date
▪ Time
▪ Maximum power consumption
▪ Childproof lock
▪ EcoManagement consumption informa-
tion
5.15 Service functions
The service functions are only available
for use by V-ZUG Service staff.
24