Installation Guide

ManualsBrandsV-Zug ManualsCooking AppliancesV-ZUG 57cm V4000 Induction Cooktop CTI4T64MMSOLD

Installation instructions

CTI4T64/74

CookTopInduction V4000

Glass ceramic hob

1078258-R02

17/03/2020

1078258-R02

The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in

the order specified.

Validity

These installation instructions apply to the following models:

Model number With DualDesign

31115 CTI4T64MMSOLD

31116 CTI4T74MMSOLD

General notes

If installing into a combustible material, the guidelines and standards for low-voltage installations and fire protection

must be strictly observed.

Identification plate

The identification plate is located next to the connection plate.

Connection plate

Identiﬁcation plate

▸ Affix the second identification plate (supplied) in an accessible position behind the front of the fitted cabinet beneath the appliance.

Summary of content (6 pages)

PAGE 1
078258-R02 Installation instructions 17/03/2020 CTI4T64/74 CookTopInduction V4000 Glass ceramic hob 1078258-R02 The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order specified.
PAGE 2
1078258-R02 Installation instructions 17/03/2020 CTI4T64/74 CookTopInduction V4000 Glass ceramic hob 1078258-R02 Installation accessories supplied Oversize mounting frame: Designation Art. no. Adjusting brace set H61548 Flush installation: Designation Art. no. Cementing-in instructions J004133 Sealing strip set H63283 Spacer set H60330 Accessories For all installation variants: Designation Art. no.
PAGE 3
1078258-R02 Installation instructions 17/03/2020 CTI4T64/74 CookTopInduction V4000 Glass ceramic hob 1078258-R02 Electrical connection Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards for low-voltage installations and the specifications of the local electricity supply companies. Refer to the identification plate for information on the required mains voltage and current type.
PAGE 4
1078258-R02 Installation instructions 17/03/2020 CTI4T64/74 CookTopInduction V4000 Glass ceramic hob 1078258-R02 General information about installation ▪ The worktop must be flat so that it is sufficiently sealed against the ingress of liquids. ▪ In order to guarantee good ventilation, a space of at least 10 mm in height is necessary beneath the appliance. Overlying installation The layout of the hob to be fitted may differ from the hob illustrated! CTI4T64MMSOLD CTI4T74MMSOLD Cable length 1.
PAGE 5
1078258-R02 Installation instructions 17/03/2020 CTI4T64/74 CookTopInduction V4000 Glass ceramic hob 1078258-R02 Flush installation The layout of the hob to be fitted may differ from the hob illustrated! Detail Z Ra Y Y X Y 8.5 -10 50 X 1 X 50 1 X 691 571 H Y Cable length 1.7 m Ri +1 0 Cable length 1.7 m Ri H CTI4T74MMSOLD 8.5 CTI4T64MMSOLD +1 0 8.5 -00.5 697± 1 ±1 7± 1 8.5 Z 577± 1 1. 5 ≥4 1. 5 50 7 50 D 5 C 1. Z ≥4 ≥4 1.
PAGE 6
1078258-R02 Installation instructions 17/03/2020 CTI4T64/74 CookTopInduction V4000 Glass ceramic hob 1078258-R02 Installation of the ventilation protective plate with 3 mm ventilation gap at the front A protective plate is necessary for the adequate ventilation of the hob. The distance between the underside of the appliance and the protective plate must be ≥10 mm. Well-fitting seal over width of cabinet element H ≥3 Caution: Mains cable must not touch protective plate! (X) 53.5 5..10 ≥67.