Installation Guide

Installation instructions
CTI4T64/74
CookTopInduction V4000
Glass ceramic hob
1078258-R02
17/03/2020
1078258-R02
6
Installation of the ventilation protective plate with 3 mm ventilation gap at the front
A protective plate is necessary for the adequate ventilation of the hob.
The distance between the underside of the appliance and the protective plate must be ≥10mm.
393
(30)
≥67.5
5..10
53.5
56
ø4
≥15
(X)
H
≥3
≤
0.5
2.5
Caution: Mains cable must
not touch protective plate!
Well-fitting seal over
width of cabinet element
Air gap over entire width of
cabinet element
≥17 cm²
According to template
Drawer
Fan
Type X Remarks
CTI4T64MMSOLD, CTI4T74MMSOLD 12mm Surface-mounted installation
CTI4T64MMSOLD, CTI4T74MMSOLD 10mm Flush installation
H Dimension from the top of the work surface to the underside of the hob (ventilation opening).
Cool air supply with regard to drawer or cabinet installed below
In order to guarantee good ventilation, a space of ≥ 10mm height is necessary beneath the appliance.
≥5
≥15
(30)
600/825/900
H
B
Drawer Centre of fan
≥25 cm²
Air gap over the entire cabinet element width
A
A Necessary space below the worktop for the appliance.
B Necessary space below the worktop for the ventilation of the appliance.
H Dimension from the top of the work surface to the underside of the hob (ventilation opening)