Installation Guide

ManualsBrandsV-Zug ManualsCooking AppliancesVZUG 70cm V6000 FullFlex Induction Cooktop with Teppan Yaki Plate

Installation instructions

Induction hob

GK11TIXFKZ | CTI6T75FKTFHD

1064512-R04

28/02/2020

1064512-R04

The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in

the order specified.

Validity

These installation instructions apply to the following models:

Model designation Model number Type Frameless,

for surface-mounted installa-

tion

Frameless,

for flush installation

GK11TIXFK FullFlex 31093 GK11TIXFKZ GK11TIXFKZ GK11TIXFKZ

CookTopInduction V6000 FullFlex 31132 CTI6T-31132 CTI6T75FKTFHD CTI6T75FKTFHD

General notes

If installing into a combustible material, the guidelines and standards for low-voltage installations and fire protection

must be strictly observed.

Identification plate

1 Identification plate with serial number (SN)

▸ Affix the second identification plate (supplied) in an accessible position behind the front of the fitted cabinet beneath the appliance.

Installation accessories supplied

Flush installation:

Designation Art. no.

Cementing-in instructions J004133

Sealing strip set H63283

Spacer set H60330

Accessories

Flush installation:

Designation Art. no.

Ventilation protective plate set for niche width 600mm H61087

Ventilation protective plate set for niche width 825mm H61088

Ventilation protective plate set for niche width 900mm H61089

Steel angle set, installation dimension 70 H63773

Intermediate support kit for the flush-mounted combination of several hobs (contains two intermediate supports) H63789

Instant adhesive for installation of the steel angle (50ml) B11657

Straight mixing nozzle B11656

TREMCLEAN isopropyl alcohol (1000ml) 1056609

Black silicone FA880 (310ml) B11555

Anthracite silicone FA880 (310ml) B11556

White silicone FA880 (310ml) 1031313

Stone grey silicone FA880 (310ml) 1031314

Marble smoothing agent AA320 (1000ml) B11557

Fugenboy (silicone finishing tool) B75158

Summary of content (6 pages)

PAGE 1
064512-R04 Installation instructions 28/02/2020 Induction hob GK11TIXFKZ | CTI6T75FKTFHD 1064512-R04 The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order specified.
PAGE 2
1064512-R04 Installation instructions 28/02/2020 Induction hob GK11TIXFKZ | CTI6T75FKTFHD 1064512-R04 Ventilation 1. The rear panel of the base unit must be open around the worktop cut-out to guarantee continuous air circulation via the ventilation slits. The air must be drawn in from outside the cabinet and be able to circulate freely from inside the cabinet to the hob. 2. Alternatively, a concealed fresh air supply can ensure air circulation inside the cabinet.
PAGE 3
1064512-R04 Installation instructions 28/02/2020 Induction hob GK11TIXFKZ | CTI6T75FKTFHD 1064512-R04 Electrical connection Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards for low-voltage installations and the specifications of the local electricity supply companies. Refer to the identification plate for information on the required mains voltage and current type.
PAGE 4
1064512-R04 Installation instructions 28/02/2020 Induction hob GK11TIXFKZ | CTI6T75FKTFHD 1064512-R04 Overlying installation The layout of the hob to be fitted may differ from the hob illustrated! Ri Y–Y 691 H B H Y Y ≥10 * 50 1 Air inlet 0 ≥5 = Drawer/Cabinet 680± 1 = 0± 1 B Ra 2× 49 0 8 49 7 ×6 ≥5 0 ≥4 90 2 = A = 600/ 550 2 = = 825/ 900 * The required clearance must be observed! 2 The front and rear pegs are reinforced underneath.
PAGE 5
1064512-R04 Installation instructions 28/02/2020 Induction hob GK11TIXFKZ | CTI6T75FKTFHD 1064512-R04 Flush installation The layout of the hob to be fitted may differ from the hob illustrated! Ri Y–Y 691 H B H Y Y ≥10 * 50 1 Air inlet 697± 1 = 50 7± +1 0 Detail Z Ra 8,5 B = Drawer/Cabinet Side panel 1 ≥5 0 Ra 680 8,5 ≥5 8,5 -00,5 A = 600/ 550 +1 0 = 49 0 R0–5 0 ≥5 07 8,5 -10 2 Steel angle bonded or screw mounted = 825/ 900 = * The required clearance must be obser
PAGE 6
1064512-R04 Installation instructions 28/02/2020 Induction hob GK11TIXFKZ | CTI6T75FKTFHD 1064512-R04 Cool air supply with regard to drawer or cabinet installed below ≥5 A gap of ≥10 mm in height is required beneath the appliance. ≥25 cm² Air gap over entire width of cabinet element A H Drawer ≥15 900/825/600/550 A Necessary space below the worktop for the appliance.