User Manual

Table Of Contents

4 Operating the appliance

Start screen for the Cooler V6000 Supreme (51098)

5 °C

Set temperature in the refrigerator compartment

Navigate to the functions

Navigate to the settings

4.3 Switching the appliance on

▸ Plug in the appliance at the mains socket.

▸ Hold the button depressed for 3 seconds.

– The appliance is switched on.

– The V-ZUG logo (display symbol) appears.

– The initial test runs (takes about 3 minutes).

A newly installed appliance takes at least 12 hours (empty state) – keeping the

door closed – to reach its normal operating temperatures. Any error message that

appears during this time is deactivated by pressing the alarm button.

When the appliance is started for the first time if instead of the stand-by message

a different message appears this means that the appliance has already started the

cooling process. During the initial set-up, the settings cannot be changed until the

set temperature is reached.

4.4 Setting the temperature

Enter the required temperature by touching the corresponding zone in the display.

Procedure using the example of the refrigerator compartment in the CombiCooler V6000

Supreme (51096):

–

5 °C

°C

– Touch the button for the refrigerator compartment,

for the FreshBox and for the freezer compart-

ment.

Temperature ranges:

– Refrigerator compartment: 2 °C to 8 °C (35 °F to 46 °F).

– FreshBox: -2 °C to 2 °C (28 °F to 35 °F).

– Freezer compartment: -22 °C to -15 °C (-7 °F to 5 °F).