User Manual

Table Of Contents

10 Noises

The appliance can make various noises during operation. Although the appliance is

noise-optimized, some noise cannot be eliminated completely. This noise depends on

the size of the appliance, how it is installed and the cooling requirements (e.g. fast cool-

ing), the ambient temperature and the installation conditions. Operating noises are partic-

ularly audible immediately after switching on the compressor; however, these noises be-

come quieter as the appliance runs.

Unusual noises are often caused by improper installation. The appliance must be in-

stalled on a level and stable surface. In open kitchens or in the case of appliances in-

stalled in partitioned areas, normal operating noises may seem louder. This is not a fault

but rather an effect of the design/architecture.

11 Trouble-shooting

This section lists faults that can be solved simply by following the instructions given. If

the fault cannot be remedied, please contact Customer Services. Before contacting Cus-

tomer Services:

▸ Please note down the serial number (SN), which is shown on the identification plate

, and

▸ the sequence of events that led to the fault.

Display message / Fault Solution / Measures

Display: Power failure! ▪ The appliance turns back on automatic-

ally when power is restored and dis-

plays the warmest recorded temperat-

ures.

▸ Press the button to acknowledge the

acoustic alarm message.

▸ Check any refrigerated or frozen food

and discard if spoiled.

Display: Appliance door open ▪ One or more appliance doors are left

open for more than 3 minutes.

▸ Close the appliance door/s.

Display: Replace water filter ▪ The message appears when the remain-

ing filter capacity is at 20%.

▸ Please change the filter as soon as pos-

sible. Further info: Cleaning and care for

the ice-maker (see page 31).