User Manual

4 Operating the appliance
4.3 Switching the appliance on
▸ Plug in the appliance at the mains socket.
▸ Hold the button depressed for 3 seconds.
– The appliance is switched on.
– The V-ZUG logo (display symbol) appears.
– The initial test runs (takes about 3 minutes).
A newly installed appliance takes at least 12 hours (empty state) – keeping the
door closed – to reach its normal operating temperatures. Any error message that
appears during this time is deactivated by pressing the alarm button.
When the appliance is started for the first time if instead of the stand-by message
a different message appears this means that the appliance has already started the
cooling process. During the initial set-up, the settings cannot be changed until the
set temperature is reached.
4.4 Setting the temperature
Enter the required temperature by touching the corresponding zone in the display.
Procedure
–
18°C
▸ Touch the button for the freezer compartment.
Temperature range: -23 °C to -13 °C (-9 °F to 8 °F).
ON
OK
°C–18
–17
–16
–19
–20
▸ Select the desired temperature by scrolling up or down.
– The value selected is displayed in orange.
ON
OK
°C–18
–17
–16
–19
–20
▸ Confirm with the OK button to accept the entry.
– The temperature setting has been entered success-
fully.
– The temperature will be reached in a few hours, de-
pending on the setting.
11