Operating instructions

… Washing
31
Detergent dosage
The amount of detergent required depends on the degree of soiling as well
as the wash load, the hardness of the water and the product being used.
Follow the detergent manufacturer’s dosing instructions.
The hardness of the water is measured using the French degree of water
hardness (°fH) and is subdivided into three categories:
The local water authorities can provide information on the level of water hard-
ness in your area.
Compartment
Bio wash
Soap wash
Adding too much detergent could cause excess foaming, giving a
poor wash result and, in the worst case, causing damage to the
appliance.
䡲 soft 0 °fH to 15 °fH
䡲 medium 15 °fH to 25 °fH
䡲 hard over 25 °fH (NB Use water softener to reduce amount of
washing detergent required.)
Pre-wash detergent Add to compartment I
Main detergent Add to compartment II
Fabric conditioner (softener) Add to compartment
Alkaline detergent Add to compartment
II
Bleach Add to compartment I
Fabric conditioner (softener) Add to compartment
Water softener Add to compartment
I
Soap detergent Add to compartment II
Fabric conditioner (softener) Add to compartment
M
A
X
II I