Operating instructions

… Trouble-shooting
47
… appears in the digital display
… and appear alternately in the digital display
Possible cause Solution
䡲 The water tap is turned
off.
䡲 The mesh filter in the
water connection is
clogged.
䡲 An interruption in the
water supply.
䡲 The water pressure is
too low.
A Remove the cause of the problem or wait
until the water supply is restored.
A Cancel the error message by pressing
the button.
A Restart the programme.
Possible cause Solution
䡲 Related to anti-leak
protection.
A Turn off the water tap.
A Note down the error message in full and
the serial number.
A Cancel the error message by pressing
the button.
A Do not interrupt the power supply to the
appliance for the next 10 minutes so that
the drain pump can continue to run.
A Call Customer Services.