Operating instructions

… Trouble-shooting
49
… and appear alternately in the digital display
… appears in the digital display
… appears in the digital display
Possible cause Solution
䡲 Faulty electrical
connection.
䡲 Over-voltage
A Cancel the error message by pressing
the button.
A Switch off the power supply for about
1 minute.
A Switch the power supply back on again and
select a new programme.
A If the error message reappears, note down
the error message in full (message, serial
number and error number), then interrupt
the electricity supply.
A Call Customer Services.
Possible cause Solution
䡲 The childproof lock is
switched on.
A See how to operate appliance with
childproof lock activated.
A Turn off childproof lock.
Possible cause Solution
䡲 If there is very heavy
foaming during the wash
cycle, the programme is
automatically extended
by an additional rinsing
cycle. This improves the
wash results, but also
increases the duration
of the programme.
A Reduce the amount of washing detergent
used next time.
A Adjust the amount of washing detergent
used to the water hardness.