Operation Manual

13
Settings
Different settings (parameters) can be set for the appliance. This is described below
for both models.
A Depress the «SET» settings key for about 3 seconds.
– appears in the display (model 245).
– appears in the displays (model 246).
A Press the «+» or the «–» settings key to toggle between the parameters.
A Press the «SET» settings key to select a parameter.
A Use the «+» or «–» settings key to change the value.
A Press the «SET» settings key to accept the value.
– The setting is saved.
A To exit, depress the «SET» settings key for about 3 seconds.
Depending on the setting, only the relevant parameters that can be changed are
shown.
It is possible to exit the settings without saving if:
䡲 no settings key is pressed for one minute,
䡲 a coin is inserted,
䡲 or an appliance is selected (model 246).
Example: With the setting for token operation, the parameters to
(CHF and EUR) are not visible.