Operating instructions Combi-Steam HSL Combi-steam cooker
Thank you for choosing to buy one of our products. Your appliance is made to high standards and is easy to use. Nevertheless, please take the time to read these operating instructions in order to familiarise yourself with the appliance and get the best use out of it. Please follow the safety precautions. Modifications Text, diagrams and data correspond to the technical standard of the appliance at the time these operating instructions went to press.
Table of contents 1 Safety precautions 1.1 Symbols used ............................................................................................. 1.2 General safety precautions ...................................................................... 1.3 Appliance-specific safety precautions ................................................... 1.4 Instructions for use ....................................................................................
7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 Own recipes ............................................................................................. BakeOmatic.............................................................................................. Professional baking ................................................................................ Soft roasting ............................................................................................. RegenerateOmatic ..........................................
12 Care and maintenance 12.1 Cleaning the exterior .............................................................................. 12.2 Cleaning the cooking space ................................................................. 12.3 Cleaning the appliance door................................................................. 12.4 Cleaning the door seal........................................................................... 12.5 Replacing the door seal.......................................................
1 Safety precautions 1.1 Symbols used Denotes important safety precautions. Failure to observe said precautions can result in injury or in damage to the appliance or fittings! Information and precautions that should be observed. Information on disposal Information about the operating instructions ▸ Indicates step-by-step instructions. – Describes how the appliance reacts to the steps taken. ▪ Indicates a list.
1 Safety precautions 1.2 General safety precautions ▪ Read the operating instructions before using the appliance for the first time! ▪ This appliance can be used by children aged 8 and above and by persons with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge, provided they are supervised or have been instructed on the safe use of the appliance and have understood the hazards involved. Children shall not play with the appliance.
1 Safety precautions 1.3 Appliance-specific safety precautions ▪ READ THE IMPORTANT SAFETY PRECAUTIONS CAREFULLY AND RETAIN FOR FUTURE USE. ▪ WARNING: The appliance and its accessible parts get hot during use. Be careful not to touch the heating elements. Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. ▪ WARNING: Accessible parts can get hot during use. Keep young children away from the appliance.
1 Safety precautions ▪ See the 'Accessories' section for the proper use of insertable parts. 1.4 Instructions for use Before using for the first time ▪ The appliance must be installed and connected to the electricity supply in accordance with the separate installation instructions. Have a qualified fitter/ electrician carry out the necessary work. Correct use ▪ The appliance is designed for use in the home for preparing food.
1 Safety precautions ▪ If the appliance is visibly damaged, do not use it. Contact our Customer Services. ▪ If the appliance is not operating properly, disconnect it from the power supply immediately. ▪ Ensure there are no foreign bodies or pets in the cooking space before closing the appliance door. ▪ Objects that could pose a danger if the appliance were accidentally switched on should not be stored in the cooking space or the heatable appliance drawer.
1 Safety precautions Caution: Risk of injury! ▪ Be careful not to put fingers in the door hinges, there is otherwise a risk of injury if the appliance door is moved. Particular care should be taken when children are around. ▪ Only leave the appliance door open in the at-rest position. An open appliance door poses a danger of tripping or injury! Do not sit or rest on the appliance door or use it as a storage surface. ▪ For hobs: A hob guard can be fitted to protect small children.
2 Disposal Packaging ▪ All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS)) are marked and should, if possible, be collected for recycling and disposed of in an environmentally friendly way. Disconnection ▪ Disconnect the appliance from the mains. With a fixed appliance, this is to be carried out by a qualified electrician! Safety ▪ Disable the appliance to prevent accidents caused by improper use, especially through children playing.
3 Using for the first time Before operating the newly installed appliance for the first time, the following steps should be taken: ▸ Remove the packaging and transportation material as well as any blue protective film from the cooking space. ▸ Clean the cooking space and the accessories. ▸ Press the power button. – The appliance switches on. Scenario 1 * * applies only to appliances which were produced after March 2016 or have received a software update.
3 Using for the first time Finishing the first-time use process ▸ Heat the empty cooking space (without wire shelves, baking trays, etc.) using the operating mode at 180 °C for about 30 minutes. As there is likely to be some smoke and odour given off, we recommend ventilating the room well during this phase. All temperatures in these operating instructions are in degrees Celsius. Apply the corresponding conversions via the user setting «Degrees Fahrenheit» (see page 63).
4 Appliance description 4.1 Construction 1 2 3 4 4.
4 Appliance description Overview of touch buttons Operating modes GourmetGuide EasyCook Favourites User settings Timer Cooking space illumination Switch off 4.3 Cooking space Using protective inserts or aluminium foil can damage the appliance. Do not place any protective insert or aluminium foil on the floor of the cooking space.
4 Appliance description 4.4 Accessories Incorrect handling can cause damage! Do not use knives or cutting wheels on the accessories. Stainless steel tray ▪ Use together with the wire shelf and perforated cooking tray as a drip tray. ▪ Serves as a baking tray for aperitif nibbles and bread. ▪ If not fully covered by the baking, its shape can become distorted during baking. This is normal. As it cools down, it will go back to its original form.
4 Appliance description Wire shelf 1 ▪ For standing roasting and baking tins on ▪ For standing meat, frozen pizza, etc. on ▸ Ensure that the cross strut 1 is to the back of the cooking space. It enables the food to be removed safely from the cooking space. ▪ Serves as a cooling rack Food probe ▪ For measuring the core temperature of food For recommended food probe temperatures, see «EasyCook». Not suitable for temperatures of over 230 °C.
5 Operating modes 5.1 Overview of operating modes All the operating modes are described below. Follow the advice given in «Tips and tricks» (see page 57) and in «EasyCook». 5.2 Steam Temperature range 30–100 °C Recommended value 100 °C Level 1 to 4 The cooking space is heated simultaneously by steam and hot air. The food is heated up or cooked by steaming.
5 Operating modes 5.3 Hot air Temperature range 30–230 °C Recommended value 180 °C Level 1 or 1 + 3 A heating element behind the back wall of the cooking space heats up the air inside the cooking space, which is circulated evenly. Uses ▪ For cakes, savouries, biscuits, bread and roasts on 1 or 2 levels 5.
5 Operating modes The supply of steam can be switched off and on again during operation. ▸ Start the operating mode. ▸ To switch off the supply of steam, select tings of the operating mode. – The «Switch steaming off» in the set- symbol goes out. ▸ To switch the supply of steam on again, select – The 5.5 «Switch steaming on». symbol illuminates. Regeneration Temperature range 80–200 °C Recommended value 120 °C Level 1 to 4 The cooking space is heated by steam and hot air.
5 Operating modes 5.6 Hot air humid Temperature range 30–230 °C Recommended value 180 °C Level 1 or 1 + 3 A heating element behind the back wall of the cooking space heats up the air inside the cooking space, which is circulated evenly. The steam produced is largely retained in the cooking space. The food retains its moisture.
6 Using the appliance The different main menus and functions are selected by pressing the corresponding touch button. Selected touch buttons and functions are illuminated in white; other selectable functions are illuminated in orange. Settings and functions that cannot be selected or changed are greyed out in the various menus.
6 Using the appliance 6.1 Filling the water tank Do not use demineralised (filtered) or distilled water. ▸ If the appliance is switched off, first press the adjusting knob. ▸ Remove the water tank to fill it. ▸ Fill the water tank with fresh, cold drinking water and seal it with the cover. ▸ Slot the filled water tank into position in the water tank compartment. Refilling water The contents of the water tank normally suffice for one cooking session.
6 Using the appliance Press and go Once all the necessary settings for the operating mode have been made, a bar appears in the display and counts down 20 seconds. If no further settings are made during this time, operation starts automatically. If a setting is changed, Press and go starts again. The duration of Press and go can be adjusted (see page 63) or it can be deactivated altogether in the user settings. ▸ To start operation immediately, i.e. without Press and go, select .
6 Using the appliance 6.3 Checking and changing the settings ▸ Select the symbol for the desired setting. ▸ To change the value, turn the adjusting knob to the right or left. ▸ Press the adjusting knob to confirm the setting. – The operating mode settings are displayed. – The changed value can be seen above the corresponding symbol. The end time can only be changed during the first 60 seconds of operation. 6.
6 Using the appliance Before setting the delayed start ▸ Place the food in the cooking space. ▸ Select the desired operating mode. ▸ Set the temperature. ▸ Set the duration. Setting a delayed start ▸ Select in the operating mode settings. – The current end time calculated using the duration is displayed. ▸ Set the desired end time and confirm. – The remaining time until the start of the operation is displayed. – After 3 minutes, the display goes out and the touch button is illuminated in white.
6 Using the appliance 6.6 Food probe temperature Only use the supplied food probe. Do not clean the food probe in the dishwasher. Always keep the plug clean. The food probe is used to measure the temperature inside the food (referred to as the food probe temperature). As soon as the food reaches the target temperature (the food probe temperature that should be attained at the end of the cooking process), operation stops automatically.
6 Using the appliance Measuring the food probe temperature If you only wish to measure the food probe temperature without operation stopping automatically when the target temperature is reached, proceed as follows: ▸ Select the desired operating mode and set the temperature and, if you wish, the duration. ▸ Plug in the food probe. ▸ Start the operating mode.
6 Using the appliance – The selected operating mode is cancelled. ▸ Press the 6.9 touch button and choose a new operating mode. Timer The timer functions like an egg timer. It can be used at any time and independently of all other functions. Setting and starting the timer ▸ Press the touch button. – A suggested value of «10mins» appears in the display. ▸ Turn the adjusting knob and set the desired duration. – The duration and the end time for the timer appear on the display.
6 Using the appliance When the timer finishes When the set duration is up: – An acoustic signal is emitted. – «Timer finished» appears in the display. ▸ To close the message, select . Switching the timer off before time ▸ Press the touch button. – The countdown to the remaining time appears in the display. ▸ Set the timer to 0 by turning the adjusting knob and confirm. Or, if the timer is the only active function: ▸ Press the touch button. Or, if you wish to switch off the appliance: ▸ Press the 6.
6 Using the appliance – If the food probe is inserted, the food probe temperature is displayed. * The food can be kept warm with residual heat for some time. As soon as the temperature falls below 80 °C, all the displays go out. If at this point the food probe is still inserted, the displays only go out when the food probe is removed. * The cooling fan can continue to run. * applies only to appliances which were produced after March 2016 or have received a software update.
6 Using the appliance 6.11 Switching the appliance off ▸ Press the touch button. – An acoustic signal is emitted. – Any running operating mode or application is ended; if switched on, the timer or cooking space illumination will remain active. – « Residual heat» appears in the display. – If the food probe is inserted, the food probe temperature is displayed. * * applies only to appliances which were produced after March 2016 or have received a software update.
6 Using the appliance The appliance is switched off if none of the touch buttons are illuminated any more and the display is dark. The cooling fan can continue to run. 6.12 Emptying the water tank Scalding hazard! The water in the tank may be hot. If «Please do not remove the water tank» appears in the display, the temperature of the residual water is too high. Do not remove the water tank! For safety reasons, the residual water is not pumped off until the temperature has fallen below a certain level.
7 GourmetGuide The GourmetGuide encompasses several programmes which make preparing meals as easy as possible for you. The following programmes can be called up: Recipes RegenerateOmatic BakeOmatic Wellness * Professional baking Hygiene * Soft roasting Keep warm * * applies only to appliances which were produced after March 2016 or have received a software update. 7.1 Recipe book A recipe book contains recipes which are tailored to suit the particular appliance.
7 GourmetGuide When cooking recipes from recipe books, a delayed start is only possible if the cooking space does not need to be preheated and the food does not need to be stirred or turned partway through, for example. ▸ To start the recipe, select . – The recipe starts. – The display shows the current recipe step, the time remaining in this step and the entire duration of the recipe. – The digital display shows the remaining time for the current recipe step.
7 GourmetGuide 7.2 Own recipes Up to 24 of your own favourite recipes can be created and saved. A recipe can consist of several steps with any operating modes (including Professional baking), pauses and hold times, which run automatically once started. You can also change and save existing recipes. Creating your own recipe ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the touch button. ▸ Select . ▸ Select . ▸ To create a new recipe, select .
7 GourmetGuide ▸ Select the desired (empty) storage space and confirm. ▸ Enter the recipe name using the on-screen keypad and confirm by pressing . – The recipe is now saved. – The following appears in the display: «Do you want to run the recipe?». If you do not wish to run the recipe, you will return to the recipes main menu. Step duration The duration of a step depends on whether values have been set for the target temperature, duration or temperature. If multiple values have been set, e.g.
7 GourmetGuide ▸ Set the displayed value to 0 or reduce it until it is less than the currently measured value. ▸ Press the adjusting knob to confirm. – The step is ended. – If it was the final step, the recipe ends too. – If it was not the final step, the next step starts. Changing recipes Any recipe – from a recipe book as well as your own recipes – can be copied and changed. ▸ Select the desired recipe book or ▸ Select . . ▸ Choose a recipe. – An overview of the steps in the recipe is displayed.
7 GourmetGuide Saving an amended recipe ▸ Select . ▸ Select storage space, enter the recipe name and confirm by pressing . – The amended recipe is now saved. A storage space that is already being used can be overwritten. Recipes that have been amended from recipe books are not saved in the recipe book, but under «Own recipes». The original recipe remains in the corresponding recipe book. Deleting your own recipe Any recipe in «Own recipes» can be deleted. ▸ Select «Own recipes». ▸ Select .
7 GourmetGuide 7.3 BakeOmatic BakeOmatic comprises applications for different food groups. The size and shape of the food are recognised and the duration and cooking space climate are adjusted automatically.
7 GourmetGuide Preheating In the case of the «Flan» food category, after starting, separate preheating takes place first. Do not put the food in until preheating has ended. Selecting and starting BakeOmatic The filled water tank must be in position in the water tank compartment. A delayed start is only possible for applications where preheating is not required and is only suitable for food that does not need to cool or rise. ▸ If the appliance is switched off, first press the adjusting knob.
7 GourmetGuide 7.4 Professional baking With professional baking , the cold cooking space is heated by a steam phase (about 10 minutes) and a hot air phase, which follows automatically. This makes yeast and puff pastries light and airy while also forming a nice, glistening crust. «Proofing» allows you to proof a large batch of dough or preprepared portions at optimal temperature and humidity levels.
7 GourmetGuide ▸ Select the desired application. – The operating mode settings are displayed. ▸ Set the temperature, duration and, if necessary, an end time or delayed start and confirm. ▸ To start professional baking, select . The filled water tank must be in position in the water tank compartment. 7.5 Soft roasting How it functions The soft roasting function allows high-quality cuts of meat to be prepared gently.
7 GourmetGuide Soft roasting table for «Soft roasting with steam» and «Soft roasting seared» Cut of meat Degree of doneness Recommended target temperature °C With steam Seared rare 54 58 medium 58 62 medium 59 63 rare 49 53 medium 53 57 rare 49 53 medium 53 57 Rump of beef medium 59 63 Rump or loin of pork medium 61 65 rare 59 63 medium 63 67 – 60 70 Fillet of veal Rump or loin of veal Fillet of beef Rib-eye or sirloin Leg of lamb Freely select meat type «Soft ro
7 GourmetGuide The food probe must be inserted as far into the middle of the meat as possible to get a correct reading of the food probe temperature. The temperature inside the meat is crucial for optimal results at the end of cooking. ▸ Put the wire shelf at level 1 and place the dish on it. ▸ Insert the food probe plug into the socket. ▸ Start «Soft roasting seared» (see page 47). «Soft roasting with steam» For «Soft roasting with steam», the meat is cooked gently with steam.
7 GourmetGuide As the meat is only seared after soft roasting for optical reasons, the recommended target temperature is 4 °C lower than for «Soft roasting seared». Selecting and starting soft roasting The longer the meat is cooked, the more tender and succulent it becomes. This applies particularly for thicker pieces of meat. The target temperature cannot be changed once soft roasting has started. ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the ▸ Select touch button. .
7 GourmetGuide The appliance door must be closed during operation. If the appliance door is opened while soft roasting is running, the operation is interrupted and then, after a short time, cancelled. Inadvertently interrupting the programme ▸ If the touch button is pressed, the soft roasting programme is interrupted. – The following appears in the display: «Should be cancelled?» ▸ To continue soft roasting, select «No». – Operation is continued.
7 GourmetGuide 7.6 RegenerateOmatic How it functions With «RegenerateOmatic», food can be heated without having to set an operating mode, temperature or duration. The quantity and shape of the food are recognised and the regeneration time and cooking space climate are adjusted individually and automatically. Degree of moisture With RegenerateOmatic, you can choose between «Regenerate crispy». Degree of moisture «Regenerate moist» and Uses Foods that should not dry out e.g.
7 GourmetGuide Selecting and starting RegenerateOmatic Before starting, the cooking space should have cooled down and be dry in order to determine the optimum duration. The appliance door should not be opened during operation. The filled water tank must be in position in the water tank compartment. ▸ Put the food in a heat-resistant dish, place it on the wire shelf and push it into the cold cooking space. ▸ If the appliance is switched off, first press the adjusting knob.
7 GourmetGuide 7.7 Wellness * * applies only to appliances which were produced after March 2016 or have received a software update. With ing: «Wellness», the following items can be prepared for personal well-be- ▪ Hot towels ▪ Hot wraps ▪ Hot stones for massage ▪ Cherry stone or grape seed cushions Caution hot! Feel the temperature of the heated objects with your hand first before placing them on any other parts of the body. Hot towels Before starting the application: ▸ Wet and wring out the towels.
7 GourmetGuide Cherry stone or grape seed cushions Before starting the application: ▸ Add the cherry stone or grape seed cushions to suitable containers and place the containers directly on the bottom of the cooking space. 7.8 Hygiene * * applies only to appliances which were produced after March 2016 or have received a software update. You can sterilise containers using available: «Hygiene». The following applications are ▪ «Sterilise baby bottles» replaces the need to boil baby bottles in hot water.
8 EasyCook EasyCook helps you to prepare any food simply and conveniently. After choosing the food group and food, the appliance suggests the suitable operating modes or GourmetGuide applications, including the settings and accessories. The brochure of the same name, which you received with the operating instructions, contains the same settings information in paper form. The values given for temperature and duration serve only as guide.
8 EasyCook 8.2 Selecting foods and starting ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the touch button. – The overview of food groups is displayed. ▸ Select the food group. ▸ Select the desired type of food. ▸ If necessary, select the shape (whole, in pieces, etc.) of the food. ▸ If necessary, select the preparation method (cooking, baking, etc.).
9 Favourites Up to 24 operating modes, GourmetGuide and EasyCook applications together with the settings made can be saved as favourites. 9.1 Creating favourites ▸ Select an operating mode, GourmetGuide or EasyCook application. ▸ Make the settings. ▸ Press the touch button. – The favourites menu opens. ▸ Select a storage space and confirm. ▸ Enter the name of the favourite using the on-screen keypad and confirm. – The favourite is saved. 9.
9 Favourites 9.3 Changing favourites ▸ Select the desired favourite. ▸ Adjust the settings as you wish. ▸ Press the touch button. ▸ Select the storage place or favourite that is to be overwritten. ▸ Enter the favourite name or overwrite as appropriate. – The modified favourite is saved. 9.4 Deleting favourites ▸ If the appliance has another menu open, press the touch button. ▸ Select . ▸ Select the favourite to be deleted.
10 Tips and tricks 10.1 Unsatisfactory cooking result... ...when baking and roasting Result Solution ▪ The baking or roast looks ▸ Next time, set a lower temperature and good on the outside but is lengthen the operating time. still doughy or raw on the inside. ▪ The cake collapses. ▸ Check that the settings used correspond to those recommended in «EasyCook». ▸ Next time, set a lower temperature and lengthen the operating time. ▸ Stir the cake mixture well. When finished, bake immediately.
10 Tips and tricks Some uneven browning is normal. More even browning is generally achieved at lower temperatures. ...for regenerated foods Result Solution ▪ Regenerated food is dried ▸ Next time, set a lower temperature and reout. duce the operating time. ▸ Use «RegenerateOmatic moist». ▪ Too much condensate on ▸ Next time, set a higher temperature and or around the regenerated lengthen the operating time. food. ▸ Use «RegenerateOmatic crispy». 10.
11 User settings 11.1 Overview of user settings 11.2 Language Volume Display Assistance functions Date Temperature Clock Childproof lock Notifications Appliance information Descale appliance Demo mode Water hardness Factory settings Adjusting user settings ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the touch button. ▪ The user settings main menu appears in the display: 괫 8VHU VHWWLQJV 6HW ODQJXDJH ▸ Select the desired user setting or submenu.
11 User settings 11.4 Display Contrast With this function, the readability of the display can be adjusted based on how the appliance is installed. Brightness The brightness of the display can be changed. Start screen * * applies only to appliances which were produced after March 2016 or have received a software update. With this user setting, you can determine the menu that is displayed when you start the appliance.
11 User settings Time format The time can be displayed in the European 24-hour time format or the US 12‑hour format (a.m./p.m.). Time display With the «Show time» setting (factory setting), the time is dimmed between 00:00 and 06:00 (24-hour format) or 12:00 a.m. and 06:00 a.m. (12-hour format). If «Hide time» is selected, the displays are not illuminated when the appliance is off. To reduce power consumption to a minimum, select «Hide time» in the user settings.
11 User settings 11.9 Water hardness The appliance features a system that automatically indicates when it is time to descale. The system can be optimised for households with soft water (also through using a water softening appliance) and medium water hardness by changing the user settings to the relevant range of water hardness.
11 User settings Press and go «Press and go» refers to the period of time after which an operating mode/ programme starts automatically as long as all necessary settings are available or have been made. Adjusting the settings restarts the countdown. «Press and go» can be switched on or off. When «Press and go» is activated, values between 10 seconds and 1 minute are possible; the factory setting is 20 seconds. 11.12 Temperature Temperature unit The temperature can be displayed in «°C» or «°F».
11 User settings 11.14 Under Appliance information «Appliance information», you will find: ▪ A link to the Service Desk ▪ The article and serial number (FN) of your appliance ▪ The software versions of your appliance as well as the acoustic signals and background images currently being used (depending on model) ▪ The operating data: – Number of descaling processes already performed – Date and time of the last descaling process – The current steam operating time 11.
12 Care and maintenance Risk of burns from hot surfaces! You should allow the appliance and the accessories to cool before cleaning. Do not reach into the water tank compartment if the following appears in the display: «Please do not remove the water tank». Improper use can result in damage to the appliance! Do not use any abrasive or caustic cleaning agents, metal scrapers that are sharp or scratch, steel wool, abrasive scouring pads, etc. These products will damage the surfaces.
12 Care and maintenance ▸ For stubborn soiling, e.g. chicken, clean the cooking space when cold with a grease-dissolving spray cleaner or cream cleaner in accordance with the manufacturers' instructions. With use, the cooking space will over time turn a golden colour, which is normal for stainless steel. Neither the cooking and baking properties of the appliance nor its operation is affected. Blue tarnish spots and condensate residue can be removed using a mild acidic cleaning agent or some lemon juice.
12 Care and maintenance ▸ Open the appliance door as far as it will go. 2 31 ▸ Fold the clips 2 on both door hinges 1 forward. ▸ Close the appliance door as far as its atrest position (about 30°). 30° ▸ Lift the appliance door out at an angle. Reassembling the appliance door ▸ From the front, push both hinges 1 into the opening 3. ▸ Open the appliance door as far as it will go and close back the clips 2. 12.
12 Care and maintenance 12.7 Cleaning the accessories and shelf guides Improper use can cause damage! Do not clean the food probe and the water tank in the dishwasher. ▪ The stainless steel tray, the perforated cooking tray, the wire shelf and the shelf guides can be cleaned in the dishwasher. ▪ Watermarks in the water tank can be removed using a standard descaler (not detergent). ▸ Clean the food probe with a soft cloth dampened with water and a little washing-up liquid.
12 Care and maintenance 12.8 Descaling How it functions Whenever steam is produced, depending on the hardness of the local water supply (i.e. the limescale content of the water), limescale is deposited in the boiler. The appliance automatically detects when descaling is necessary and indicates this information. – After pressing the touch button and at the Would you like to descale the appliance now? end of each cooking process, the following ap- You must accompany the propears in the display: cess.
12 Care and maintenance Descaler durgol swiss steamer Using the wrong descaler can damage the appliance! Only use «durgol swiss steamer» to descale your appliance. The descaler contains highly effective acid. Immediately rinse away any splashes with water. Follow the manufacturer's instructions. See «Accessories and spare parts» for where to obtain this descaler. «durgol swiss steamer» was developed especially for this appliance.
12 Care and maintenance Starting the descaling process The appliance must have cooled down before descaling. Remove accessories, dishes or other objects from the cooking space. Do not leave the appliance unattended: During the descaling process, the descaler must be filled and the water tank must be emptied. The appliance door must be kept closed during descaling. When the following message appears in the display «Would you like to descale the appliance now? You must accompany the process.
12 Care and maintenance Replacing the rinsing solution ▸ As soon as the corresponding message appears in the display, remove the water tank, pour the rinsing solution away and fill i with 1 l warm water. ▸ Put the water tank back. – The rinsing phase starts automatically. – The following appears in the display: «Rinsing appliance.». ▸ Repeat the process as often as is necessary. As the water is heated up during final rinsing, the appliance door may steam up.
13 Trouble-shooting 13.1 What to do if … This section lists faults that can be solved simply by following the instructions given. If another fault is displayed or the fault cannot be remedied, please call Customer Services. Before calling Customer Services, please note down the error message in full. Fxx/Exxx see operating instructions FNxxxxx xxxxxx. … the appliance is not working Possible cause Solution ▪ A household fuse or circuit ▸ Change the fuse. breaker has tripped.
13 Trouble-shooting ... no visible steam is produced when steaming Possible cause Solution ▪ The temperature of the cooking space is over 100 °C. No solution required: Steam is invisible above 100 °C. ...the food probe temperature is not displayed Possible cause Solution ▪ The food probe is not plugged in correctly. ▸ Check whether the food probe is correctly plugged into the socket. ▸ Check whether the food probe is correctly inserted in the food: The tip must be in the centre of the thickest part.
13 Trouble-shooting …the appliance makes noises during operation Possible cause Solution ▪ The appliance may emit Such noise is normal. noise when operating (e.g. switching and pumping noises). … the clock is not running correctly Possible cause Solution ▪ Irregular mains frequency ▸ Switch off the mains synchronization. ▪ Internal pulse generator is ▸ Call Customer Services. imprecise when mains synchronization is switched off. ...
13 Trouble-shooting … the following appears in the display UX/EXX see operating instructions FN XXX XXXXXX Possible cause Solution ▪ An interruption in the power supply. ▸ Cancel the error message by pressing the button. ▸ Disconnect from the power supply for about 1 minute. ▸ Reconnect the power supply. ▸ If the error appears again, note down the error message in full along with the serial number (FN; see identification plate). ▸ Disconnect from the power supply. ▸ Call Customer Services. ...
13 Trouble-shooting ...the following appears in the display Descaling failed. Appliance has not been descaled. Possible cause Solution ▪ Used unsuitable descaler. ▸ Descale again using the recommended descaler. ▪ Descaling was not carried ▸ If the message does not disappear after reout correctly. peating the descaling process several times, note down the error message in full and the serial number (FN; see identification plate). ▸ Call Customer Services. 13.
13 Trouble-shooting Prolonged power failure Scenario 1 * * applies only to appliances which were produced after March 2016 or have received a software update. The process involved in using the appliance for the first time is carried out after a prolonged power failure. However, only the language and time need to be reset to enable the appliance to be operated again. It is not necessary to make any other settings. – If a descaling process was running, the descaling process continues.
14 Accessories and spare parts The accessories listed below, as well as spare parts, can also be ordered in addition to the scope of delivery of the appliance. Ordering is subject to a fee, except in the event of warranty claims. Please give the product family of the appliance and exact description of the accessory or spare part when ordering parts. 14.
14 Accessories and spare parts 14.3 Spare parts Shelf guides left/right Knurled nut Lid for water tank Water tank durgol swiss steamer descaler The descaler is also available from specialist retailers.
15 Technical data Dimensions ▸ See installation instructions Electrical connection ▸ See identification plate 1 1 15.1 Note for testing institutes The energy efficiency class according to EN 50304/EN 60350 is determined using the operating mode. Placing thermocouples between the appliance door and the seal can cause lack of leak-tightness and thus measuring errors. The usable volume as defined by EN 50304/EN 60350 is obtained with the shelf guides disassembled.
15 Technical data 15.3 Product data sheet In accordance with EU Regulation No.: 66/2014 Brand – V-ZUG Ltd Type of appliance – Steam cooker Model designation – CSTHSL Mass of appliance kg 28 Number of cavities – 1 Heat source per cavity – Electric l 34 Energy consumption in conventional mode ) kWh/ cycle – Energy consumption in hot air / forced convection mode 2) kWh/ cycle 0.47 Energy-efficiency index per cavity 3) – 68.
15 Technical data 15.4 Automatic energy-saving stand-by To prevent unnecessary energy consumption, the appliance is equipped with an automatic energy-saving stand-by feature. To reduce power consumption to a minimum, select «Hide time» in the user settings. Despite automatic energy-saving stand-by, all safety features are active. 15.5 Reference to «Open Source» licence Your appliance contains Newlib open-source software. This is subject to the licensing conditions specified in Section 4.1 (4.1.1-4.1.
16 Index A Aborting Changing recipes .............................. Creating your own recipe ................ Operating mode ................................ Recipes ............................................... Accessories ....................................... 17, Cleaning .............................................. Acoustic signals ....................................... Activating/deactivating steam supply .. Appliance door Cleaning .............................................. Removing........
16 Index Hot air with steaming .............................. 20 Hygiene...................................................... 52 I Identification plate.................................... 81 Illumination ......................................... 62, 73 Initial set-up .................................................. 9 Instruction message ................................ 61 Instructions for use ..................................... 9 K Keep warm................................................
T Target temperature .................................. 28 Technical data .......................................... 81 Technical enquiries.................................. 87 Temperature sensor ................................ 16 Temperature unit...................................... 63 Testing institutes ...................................... 81 Time display.............................................. 61 Time format ............................................... 61 Timer ..............................
17 Service & Support The «Troubleshooting» chapter provides valuable information for dealing with minor operating faults. This saves you the time, effort and potential cost of having to call out a service technician. Information on the V-ZUG warranty can be found at www.vzug.com →Service →Warranty information. Please read this information carefully. Please register your V-ZUG appliance online immediately at www.vzug.com→Service→Warranty registration.
Quick instructions Here you will find an overview of key operating information. Active menu 곋 2SHUDWLQJ PRGHV 6WHDP Menu buttons 12:00 Action buttons Adjusting knob as a central operating element ► Press to switch on the appliance or to select/confirm ► Turn to set the temperature and time or to navigate within the menu Menu and action buttons The menu buttons contain a selection of preparation options and user settings. These can be selected by pressing the relevant button.
