Operating instructions Combi-Steam XSL Combi-steam cooker
Thank you for choosing to buy one of our products. Your appliance is made to high standards and is easy to use. Nevertheless, please take the time to read these operating instructions in order to familiarise yourself with the appliance and get the best use out of it. Please follow the safety precautions. Modifications Text, diagrams and data correspond to the technical standard of the appliance at the time these operating instructions went to press.
Table of contents 1 Safety precautions 6 1.1 Symbols used ........................................................................................................ 6 1.2 General safety precautions ................................................................................. 7 1.3 Appliance-specific safety precautions ............................................................. 7 1.4 Instructions for use ............................................................................................
7.3 Vacuisine * ........................................................................................................... 36 7.4 BakeOmatic ......................................................................................................... 38 7.5 Professional baking ............................................................................................ 40 7.6 Soft roasting......................................................................................................... 41 7.
11.17 Factory settings ................................................................................................... 59 12 Care and maintenance 60 12.1 Cleaning the exterior .......................................................................................... 60 12.2 Cleaning the cooking space............................................................................. 60 12.3 Cleaning the appliance door ............................................................................ 61 12.
1 Safety precautions 1.1 Symbols used Denotes important safety precautions. Failure to observe said precautions can result in injury or in damage to the appliance or fittings! Information and precautions that should be observed. Information on disposal Information about the operating instructions ▸ Indicates step-by-step instructions. – Describes how the appliance reacts to the steps taken. ▪ Indicates a list.
1 Safety precautions 1.2 General safety precautions ▪ Read the operating instructions before using the appliance for the first time! ▪ This appliance can be used by children aged 8 and above and by persons with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge, provided they are supervised or have been instructed on the safe use of the appliance and have understood the hazards involved. Children shall not play with the appliance.
1 Safety precautions ▪ WARNING: Accessible parts can get hot during use. Keep young children away from the appliance. ▪ This appliance is intended for use in the home and similar settings such as: in staff kitchens in shops, offices and other commercial establishments; in agricultural establishments; by guests in hotels, motels and other accommodation establishments; in bed and breakfast establishments. ▪ A heatable appliance drawer and its contents get hot.
1 Safety precautions 1.4 Instructions for use Before using for the first time ▪ The appliance must be installed and connected to the electricity supply in accordance with the separate installation instructions. Have a qualified fitter/ electrician carry out the necessary work. Correct use ▪ The appliance is designed for use in the home for preparing food.
1 Safety precautions ▪ Objects that could pose a danger if the appliance were accidentally switched on should not be stored in the cooking space or the heatable appliance drawer. Do not store food or any temperature-sensitive or inflammable materials, e.g. cleaning agents, oven sprays, etc., in the cooking space or the heatable appliance drawer. ▪ For appliances with grill: Leave the appliance door closed when grilling.
1 Safety precautions Caution: Risk to life! ▪ Danger of suffocation! Keep packaging material, e.g. plastic film and polystyrene, away from children. Packaging material can be dangerous for children. How to avoid damaging the appliance ▪ Close the appliance door carefully. ▪ For appliances with visible bottom heating element: Do not place any objects directly on the bottom heating element. ▪ Do not use protective aluminium inserts with appliances with no visible bottom heating element.
2 Disposal Packaging ▪ All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS)) are marked and should be collected for recycling and disposed of in an environmentally friendly way. Disconnection ▪ Disconnect the appliance from the mains. With a fixed appliance, this is to be carried out by a qualified electrician! Safety ▪ Disable the appliance to prevent accidents caused by improper use, especially through children playing.
3 Using for the first time Before operating the newly installed appliance for the first time, the following steps should be taken: ▸ Remove packaging and transport materials as well as any protective blue film from out of the cooking space. ▸ Clean the cooking space and the accessories. ▸ Press the power button. – The appliance switches on.
4 Appliance description 4.1 Construction 1 2 3 4 4.
4 Appliance description Overview of touch buttons Operating modes GourmetGuide EasyCook User settings Favourites Water tank Timer Cooking space illumination Switch off 4.3 Cooking space Using protective inserts or aluminium foil can damage the appliance. Do not place any protective insert or aluminium foil on the floor of the cooking space.
4 Appliance description 4.4 Accessories Incorrect handling can cause damage! Do not use knives or cutting wheels on the accessories. TopClean baking tray ▪ Baking tin for flans and biscuits ▪ Use together with the wire shelf as a drip tray ▪ If not fully covered, its shape can become distorted during baking. This is normal. It will go back to its original form as it cools down. ▪ Not suitable for the operating modes , , or for GourmetGuide. ▸ Use a stainless steel baking tray instead.
4 Appliance description Perforated cooking tray ▪ For cooking fresh or frozen vegetables, meat and fish. ▪ For standing ramekins, preserving jars, etc. on. ▪ For extracting juice from berries, fruit, etc. Wire shelf 1 ▪ For standing roasting and baking tins on ▪ For standing meat, frozen pizza, etc. on ▸ Ensure that the cross strut 1 is to the back of the cooking space. It enables the food to be removed safely from the cooking space.
5 Operating modes 5.1 Overview of operating modes All the operating modes are described below. Follow the advice given in «Tips and tricks» (see page 52) and in «EasyCook». 5.2 Steam Temperature range Recommended value Level 30–100 °C 100 °C 1 to 4 The cooking space is heated simultaneously by steam and hot air. The food is heated up or cooked by steaming.
5 Operating modes Uses ▪ For cakes, savouries, biscuits, bread and roasts on 1 or 2 levels 5.4 Hot air with steaming Temperature range Recommended value Level 80–230 °C 180 °C 2 or 1 + 3 A heating element behind the back wall of the cooking space heats up the air inside the cooking space, which is circulated evenly. With condensing steam, the energy is transferred more efficiently to the food than when cooking with hot air, which accelerates the cooking process. Steam over 100° C is not visible.
5 Operating modes 5.5 Regeneration Temperature range Recommended value Level 80–200 °C 120 °C 1 to 4 The cooking space is heated by steam and hot air. The food is reheated gently without drying it out. Uses ▪ Reheating precooked foods and convenience foods Possible to regenerate on several levels simultaneously. 5.
6 Using the appliance The different main menus and functions are selected by pressing the corresponding touch button. Selected touch buttons and functions are illuminated in white; other selectable functions are illuminated in orange. Settings and functions that cannot be selected or changed are greyed out in the various menus.
6 Using the appliance Refill water The contents of the water tank normally suffice for one cooking session. If, however, the water tank needs to be refilled: ▸ Fill the water tank with a maximum of 0.5 l of water as otherwise water could spill over at the end of operation. 6.2 Selecting and starting the operating mode ▸ If the appliance is switched off: first press the adjusting knob. ▸ If the appliance is in another menu: press the touch button.
6 Using the appliance Display overview 곍 +RW DLU 4 3 6HW WHPSHUDWXUH 2 1 굸 굶 K 굴 굵 5 6 1 Operating mode settings 2 Current position of the adjusting knob / selected setting 3 Press and go 4 Operating mode with symbol 5 Set values / recommended values 6 Symbols for settings 6.3 Checking and changing the settings ▸ Select the symbol for the desired setting. ▸ To change the value, turn the adjusting knob to the right or left. ▸ Press the adjusting knob to confirm the setting.
6 Using the appliance 6.5 Setting a delayed start / end time The delayed start is activated when for the operating mode selected both the duration and the end time are set. The appliance switches automatically on and off again at the desired times. If you use the food probe, you will need to estimate and set the duration. You will find a guide on times in «EasyCook». The appliance switches on with a delay and switches off again when the set target temperature is reached.
6 Using the appliance 6.6 Food probe temperature Only use the supplied food probe. Do not clean the food probe in the dishwasher. Always keep the plug clean. The food probe is used to measure the temperature inside the food (referred to as the food probe temperature). As soon as the food reaches the target temperature (the food probe temperature that should be attained at the end of the cooking process), operation stops automatically.
6 Using the appliance Measuring the food probe temperature If you only wish to measure the food probe temperature without operation stopping automatically when the target temperature is reached, proceed as follows: ▸ Select the desired operating mode and set the temperature and, if you wish, the duration. ▸ Plug in the food probe. ▸ Start the operating mode. – The current food probe temperature is shown in the top part of the display when cooking. 6.
6 Using the appliance 6.9 Timer The timer functions like an egg timer. It can be used at any time and independently of all other functions. Setting and starting the timer ▸ Press the touch button. – A suggested value of «10min» appears in the display. ▸ Turn the adjusting knob and set the desired duration. – The duration and the end time for the timer appear in the display. The timer can be set for: ▪ up to 10 minutes in 10-second intervals, e.g.
6 Using the appliance Switching the timer off before time ▸ Press the touch button. – The countdown to the time remaining appears in the display. ▸ Set the timer to 0 by turning the adjusting knob and confirm. Or, if the timer is the only active function: ▸ Press the touch button. Or, to switch off the appliance: ▸ Press the 6.10 touch button 2×.
6 Using the appliance For appliances with a retractable handle, the displays and touch buttons do not go out until the handle can be retracted. « Residual heat» is still displayed, even when it falls below 80 °C. For all operating modes that use steam, steam reduction can take place at the end of the cooking process. The steam is gradually released from the cooking space into the atmosphere – this takes about 1 minute.
6 Using the appliance Or at the end of operation: ▸ Select the option in the display. – An acoustic signal is emitted. – Any running operating mode or application is ended; if switched on, the timer or cooking space illumination will remain active. – The following appears in the display: « Residual heat». – If the food probe is plugged in, the food probe temperature is displayed. * * Depending on the software version ▸ Press the touch button. – All touch buttons go out.
7 GourmetGuide The GourmetGuide encompasses several programmes which make preparing meals as easy as possible for you. The following programmes can be called up: Recipes Vacuisine * BakeOmatic Wellness * Professional baking Hygiene * Soft roasting Keep warm * RegenerateOmatic * Depending on the software version 7.1 Recipe book A recipe book contains recipes which are tailored to suit the particular appliance. These are already programmed into the appliance and run automatically once started.
7 GourmetGuide Starting a recipe For recipes that do not require preheating, place the food in the cold cooking space. ▸ If the appliance is switched off, first press the adjusting knob. ▸ Fill the water tank with fresh, cold drinking water and slot into position in the water tank compartment. ▸ Press the ▸ Select touch button. . ▸ Select the desired recipe book or «Own recipes». ▸ To select a recipe, choose . ▸ Select a recipe. – The recipe settings are displayed.
7 GourmetGuide Cancelling the recipe ▸ In the recipe settings, select . – The following appears in the display: «Should the current recipe be cancelled?» ▸ To abort the recipe, select «Yes». – The recipe is cancelled. 7.2 Own recipes Up to 24 of your own favourite recipes can be created and saved. A recipe can consist of several steps with any operating modes (including Professional baking), pauses and hold times, which run automatically once started. You can also change and save existing recipes.
7 GourmetGuide ▸ Set additional steps in the same way. A recipe can consist of up to 9 steps. ▸ To save the recipe, select . – The overview of the available storage spaces is displayed. ▸ Select the desired (empty) storage space and confirm. ▸ Enter the recipe name using the on-screen keypad and confirm by pressing . – The recipe is now saved. – The following appears in the display: «Do you want to run the recipe?». If you do not wish to run the recipe, you will return to the recipes main menu.
7 GourmetGuide ▸ Set the displayed value to 0 or reduce it until it is less than the currently measured value. ▸ Press the adjusting knob to confirm. – The step is ended. – If it was the final step, the recipe ends too. – If it was not the final step, the next step starts. Changing recipes Any recipe – from a recipe book as well as your own recipes – can be copied and changed. ▸ Select the desired recipe book or . ▸ Select . ▸ Choose a recipe. – An overview of the steps in the recipe is displayed.
7 GourmetGuide A storage space that is already being used can be overwritten. Recipes that have been amended from recipe books are not saved in the recipe book, but under «Own recipes». The original recipe remains in the corresponding recipe book. Deleting your own recipe Any recipe in «Own recipes» can be deleted. ▸ Select «Own recipes». ▸ Select . ▸ Select the recipe to be deleted. – The following appears in the display: «Do you want to delete this recipe?» ▸ To delete the recipe, select «Yes».
7 GourmetGuide Preparing the food ▪ Vacuum seal the food. For this, see the tips in the operating instructions for the vacuum drawer, on the homepage or in the recipe brochure. ▪ To monitor the food probe temperature of the meat with the food probe, the spot where the food probe punctures the vacuum bag must be sealed with a sealing pad (see page 71). This ensures that the vacuum is maintained in the bag.
7 GourmetGuide With «Vacuisine», the food probe only serves to monitor the food probe temperature. It is not possible to set the food probe temperature. If the food probe is plugged in for monitoring, an acoustic signal is emitted when the core temperature of the meat is roughly the same as the temperature of the cooking space.
7 GourmetGuide Degree of browning For certain food categories, the degree of browning can be adjusted by selecting the «lightly browned», «medium browned» or «well browned» setting. When used for frozen products, the approximate duration indicated on the packaging must be selected instead of the degree of browning. Frozen products are prepared in a variety of ways. Duration When BakeOmatic starts, sensors determine the optimum duration. The effective duration is displayed after about 10–15 minutes.
7 GourmetGuide ▸ To start BakeOmatic, select . – Depending on the application, the cooking space may be preheated first; when the temperature is reached, an acoustic signal is emitted. – The following appears in the display: «Introduce food. Select to continue.». ▸ Put the food at the appropriate level. ▸ To confirm the message, select . – The following appears in the display: « is being determined.». – The countdown to the time remaining appears in the display and in the digital display.
7 GourmetGuide ▪ For a nice, crispy crust: the smaller the item to be baked, the higher the temperature. The optimum temperature for bread buns is generally higher than for a single loaf of bread. ▪ When using «Plaited bread», we recommend brushing the shaped dough with egg wash. Selecting and starting professional baking ▸ Put in the food. ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the touch button. ▸ Select . ▸ Select the desired application.
7 GourmetGuide ▪ Quality: lean, high-quality meat Soft roasting table for «Soft roasting with steam» and «Soft roasting seared» Cut of meat Degree of doneness Recommended target temperature °C With steam Seared Fillet of veal rare medium 54 58 58 62 Rump or loin of veal medium 59 63 Fillet of beef rare medium 49 53 53 57 Rib-eye or sirloin rare medium 49 53 53 57 Rump of beef medium 59 63 Rump or loin of pork medium 61 65 Leg of lamb rare medium 59 63 63 67 – 60 70 Freely
7 GourmetGuide ▸ Put the wire shelf at level 2 and place the dish on it. ▸ Insert the food probe plug into the socket. ▸ Start «Soft roasting seared» (see page 44). «Soft roasting with steam» For «Soft roasting with steam», the meat is cooked gently with steam. Since steam transfers energy better, shorter cooking times and thus energy savings are possible. As steam produces condensate, more residual water is left in the cooking space at the end of the cooking process than with «Soft roasting seared».
7 GourmetGuide Selecting and starting soft roasting The longer the meat is cooked, the more tender and succulent it becomes. This applies particularly for thicker pieces of meat. The target temperature cannot be changed once soft roasting has started. ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the ▸ ▸ ▸ ▸ touch button. Select . Select the desired soft roasting method. Select the desired type of meat. Select the desired cut.
7 GourmetGuide Inadvertently interrupting the programme ▸ If the touch button is pressed, the soft roasting programme is interrupted. – The following appears in the display: «Should ▸ To continue soft roasting, select «No». – Operation is continued. be cancelled?» Cancelling/ending soft roasting before time ▸ Select in the soft roasting settings or press the touch button. – The following appears in the display: «Should ▸ Select «Yes». – Operation is cancelled.
7 GourmetGuide Selecting and starting RegenerateOmatic Before starting, the cooking space should have cooled down and be dry in order to determine the optimum duration. The appliance door should not be opened during operation. The filled water tank must be in position in the water tank compartment. ▸ Put the food in a heat-resistant dish, place it on the wire shelf and push it into the cold cooking space. ▸ If the appliance is switched off: first press the adjusting knob. ▸ Press the ▸ Select touch button.
7 GourmetGuide 7.8 Wellness * * Depending on the software version With «Wellness», the following items can be prepared for personal well-being: ▪ Hot towels ▪ Hot wraps ▪ Hot massage stones ▪ Cherry stone or grape seed cushions Caution hot! Feel the temperature of the heated objects with your hand first before placing them on any other parts of the body. Hot towels Before starting the application: ▸ Wet and wring out the towels.
7 GourmetGuide 7.9 Hygiene * * Depending on the software version «Hygiene» can be used for sterilizing containers. The following applications are available: ▪ «Sterilize baby bottles» replaces the need to boil baby bottles in hot water. ▪ «Prepare jam jars» replaces the need to prepare empty jam jars by rinsing them with hot water. ▪ «Preserve jam» helps to preserve the jam for longer. Feeding bottles Before starting the application: ▸ Clean the bottles.
8 EasyCook EasyCook helps you to prepare any food simply and conveniently. After choosing the food group and food, the appliance suggests the suitable operating modes or GourmetGuide applications, including the settings and accessories. The brochure of the same name, which you received with the operating instructions, contains the same settings information in paper form. The values given for temperature and duration serve only as guide.
8 EasyCook 8.2 Selecting and starting foods ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the touch button. – The overview of food groups is displayed. ▸ Select the food group. ▸ Select the desired type of food. ▸ If necessary, select the shape (whole, in pieces, etc.) of the food. ▸ If necessary, select the preparation method (cooking, baking, etc.).
9 Favourites Up to 24 operating modes, GourmetGuide and EasyCook applications together with the settings made can be saved as favourites. 9.1 Creating favourites ▸ Select an operating mode, GourmetGuide or EasyCook application. ▸ Make the settings. ▸ Press the touch button. – The favourites menu opens. ▸ Select a storage space and confirm. ▸ Enter the name of the favourite using the on-screen keypad and confirm. – The favourite is saved. 9.
10 Tips and tricks 10.1 Unsatisfactory cooking result... … when baking and roasting Result Solution ▪ The baking or roast looks ▸ Next time, set a lower temperature and good on the outside but is lengthen the operating time. still doughy or raw on the inside. ▪ The cake collapses. ▸ Check that the settings used correspond to those recommended in «EasyCook». ▸ Next time, set a lower temperature and lengthen the operating time. ▸ Stir the cake mixture well. When finished, bake immediately.
10 Tips and tricks ... for regenerated foods Result Solution ▪ Regenerated food is dried out. ▸ Next time, set a lower temperature and reduce the operating time. ▸ Use «RegenerateOmatic moist». ▪ Too much condensate on or ▸ Next time, set a higher temperature and around the regenerated food. lengthen the operating time. ▸ Use 10.2 «RegenerateOmatic crispy». General tips ▪ Several foods can be cooked simultaneously to save energy, e.g.
11 User settings 11.1 Overview of user settings 11.2 Language Assistance functions Display Temperature Date Childproof lock Clock Appliance information Notifications Demo mode Descale appliance Check connection Water hardness Loudness Factory settings Adjusting user settings ▸ If the appliance is switched off, first press the adjusting knob. ▸ Press the touch button.
11 User settings 11.3 Language The language in the display can be changed. Different languages are available for selection. 11.4 Display Brightness The brightness of the display can be changed. Background images You can turn the background image display on and off. If background images are activated, different images are displayed depending on the menu. Start screen * * Depending on the software version With this user setting, you can determine the menu that is displayed when you start the appliance.
11 User settings 11.6 Clock The following time functions are available: ▪ ▪ Time Time format ▪ Time display ▪ Mains synchronization Time format The time can be displayed in the European 24-hour time format or the US 12‑hour format (a.m./p.m.). Time display With the «Show time» setting (factory setting), the time is dimmed between 00:00 and 06:00 (24-hour format) or 12:00 a.m. and 06:00 a.m. (12-hour format). If «Hide time» is selected, the displays are not illuminated when the appliance is off.
11 User settings 11.9 Water hardness The appliance features a system that automatically indicates when it is time to descale. The system can be optimized for households with soft water (also through using a water softening appliance) and medium water hardness by changing the user settings to the relevant range of water hardness.
11 User settings Automatic door handle function Only relevant to appliances with a retractable handle. When the automatic door handle function is switched on (factory setting), the door handle is extended automatically, e.g. when an operating mode is set or comes to an end. It is then retracted again. When the automatic door handle function is switched off, the door handle remains extended at all times. Water tank With the «Automatic» setting, the water tank is automatically ejected when it is empty.
11 User settings 11.14 Appliance information Under «Appliance information», you will find: ▪ The article number and serial number (FN) of your appliance ▪ The software versions of your appliance as well as the acoustic signals and background images currently being used (depending on model) ▪ The operating data: – number of descaling processes already performed – date and time of the last descaling process – steam operating time to date 11.
12 Care and maintenance Risk of burns from hot surfaces! You should allow the appliance and the accessories to cool before cleaning. Do not reach into the water tank compartment if the following appears in the display: «Please do not remove the water tank». Improper use can result in damage to the appliance! Do not use any abrasive or caustic cleaning agents, metal scrapers that are sharp or scratch, steel wool, abrasive scouring pads, etc. These products will damage the surfaces.
12 Care and maintenance With use, the cooking space will over time turn a golden colour, which is normal for stainless steel. Neither the cooking and baking properties of the appliance nor its operation is affected. Blue tarnish spots and condensate residue can be removed using a mild acidic cleaning agent or some lemon juice. Over time with use, the cooking space can turn a shimmering rainbow colour or the surface can turn slightly matt.
12 Care and maintenance ▸ Close the appliance door as far as its at-rest position (about 30°). ▸ Lift the appliance door out at an angle. 30° Reassembling the appliance door ▸ From the front, push both hinges 1 into the opening 3. ▸ Open the appliance door as far as it will go and close back the clips 2. 12.4 Cleaning the door seal ▸ Clean the door seal with a soft cloth dampened with water, but do not use any cleaning agent. ▸ Wipe dry with a soft cloth. 12.
12 Care and maintenance Removing the shelf guides ▸ Unscrew the knurled nuts 1 in the front of the shelf guides in an anticlockwise direction. ▸ Pull the shelf guides 2 to the side of the screws and remove from the front. 1 2 Reassembling the shelf guides ▸ Insert the shelf guides into the openings in the back wall of the cooking space and position on the screws. Place the knurled nuts on the screws and tighten securely in a clockwise direction. 12.
12 Care and maintenance Read remaining operating time The remaining steam operating time until the next descaling process can be read in the user settings under «Descaling». Descaler durgol swiss steamer Using the wrong descaler can damage the appliance! Only use «durgol swiss steamer» to descale your appliance. The descaler contains highly effective acid. Immediately rinse away any splashes with water. Follow the manufacturer's instructions.
12 Care and maintenance If an acoustic signal is emitted and « Residual heat too high» appears in the display, the appliance has not cooled down sufficiently and the descaling process cannot be started. ▸ Allow the appliance to cool down. ▸ As soon as the corresponding message appears in the display: fill the water tank with 0.5 l undiluted descaler, insert the tank and select . – The descaling process starts. – The following appears in the display: «Descaling appliance.
13 Trouble-shooting 13.1 What to do if … This section lists faults that can be solved simply by following the instructions given. If another fault is displayed or the fault cannot be remedied, please call Customer Services. Before calling Customer Services, please note down the error message in full. Fxx/Exxx see operating instructions FNxxxxx xxxxxx. … the appliance is not working Possible cause Solution ▪ A household fuse or circuit ▸ Change the fuse. breaker has tripped.
13 Trouble-shooting ... no visible steam is produced when steaming Possible cause Solution ▪ The temperature of the cooking space is over 100 °C. No solution required: Steam is invisible above 100 °C. ... the food probe temperature is not displayed Possible cause Solution ▪ The food probe is not plugged in correctly. ▸ Check whether the food probe is correctly plugged into the socket. ▸ Check whether the food probe is correctly inserted in the food: The tip must be in the centre of the thickest part.
13 Trouble-shooting … the clock is not running correctly Possible cause Solution ▪ Irregular mains frequency ▸ Switch off the mains synchronization. ▪ Internal pulse generator is ▸ Call Customer Services. imprecise when mains synchronization is switched off. ... the following appears in the display FX/EXX see operating instructions FN XXX XXXXXX Possible cause Solution ▪ Various situations can lead ▸ Cancel the error message by pressing the to an error message. touch button.
13 Trouble-shooting ... the following appears in the display Residual heat Do not remove the water tank. Possible cause Solution ▪ Water temperature in the boiler is too high. ▸ Wait for it to cool down (this can take up to 30 minutes). For safety reasons, water is only pumped off when it falls below a certain temperature. The appliance may be used without further ado. ... the following appears in the display Descaling failed. Appliance was not descaled.
14 Accessories and spare parts The accessories listed below, as well as spare parts, can be ordered in addition to the scope of delivery of the appliance. Ordering is subject to charge, except in the event of warranty claims. Please give the product family of the appliance and exact description of the accessory or spare part when ordering parts. 14.
14 Accessories and spare parts 14.3 Spare parts Shelf guides left/right Knurled nut Lid for water tank Water tank Sealing pad for Vacuisine with food probe durgol swiss steamer descaler The descaler is also available from specialist retailers.
15 Technical data Dimensions ▸ See installation instructions Electrical connection ▸ See identification plate 1 15.1 1 Note for testing institutes The energy efficiency class according to EN 50304/EN 60350 is determined using the operating mode. Placing thermocouples between the appliance door and the seal can cause lack of leak-tightness and thus measuring errors. The usable volume within the meaning of EN 50304 / EN 60350 is obtained with the shelf guides disassembled.
15 Technical data 15.3 Product fiche In accordance with EU Regulation No.: 66/2014 Brand – V-ZUG Ltd Type of appliance – Steam cooker Model designation – CSTXSL Mass of appliance kg 36 Number of cavities – 1 Heat source per cavity – Electric l 51 Energy consumption in conventional mode ) kWh/ cycle – Energy consumption in hot air / forced convection mode 2) kWh/ cycle 0.53 Energy-efficiency index per cavity 3) – 69.
15 Technical data 15.5 Reference to «Open Source» licence Your appliance contains Newlib open-source software. This is subject to the licensing conditions specified in Section 4.1 (4.1.1-4.1.8; 4.1.9; 4.1.10; 4.1.14-4.1.16) of the enclosed open-source software licence text document.
16 Index A Accessories ............................................ 16, 70 Descaler.......................................................... 64 Descaling........................................................ 63 Duration until next descaling process ............................................... Failed ................................................... Rinsing phase .................................... Starting ................................................ 59 69 65 64 Dimensions ...............
I R Identification plate......................................... 72 Illumination .............................................. 57, 66 Initial set-up ............................................... 9, 13 Instruction message ..................................... 56 Instructions for use ......................................... 9 Recipe book ........................................... 31, 70 Unlocking............................................ 31 Recipes..................................................
16 Index Time format .................................................... 56 Timer ............................................................... 27 Tips and tricks ............................................... 52 Touch buttons................................................ 15 Type................................................................... 2 U U and E messages ....................................... 68 Uneven browning .......................................... 52 User settings..................
17 78 Notes
18 Service & Support The «Troubleshooting» chapter provides valuable information for dealing with minor operating faults. This saves you the time, effort and potential cost of having to call out a service technician. Information on the V-ZUG warranty can be found at www.vzug.com →Service →Warranty information. Please read this information carefully. Please register your V-ZUG appliance online immediately at www.vzug.com →Service →Warranty registration.
Quick instructions Here you will find an overview of key operating information. Active menu 곋 2SHUDWLQJ PRGHV 6WHDP Menu buttons 12:00 Action buttons Adjusting knob as a central operating element ► Press to switch on the appliance or to select/confirm ► Turn to set the temperature and time or to navigate within the menu Menu and action buttons The menu buttons contain a selection of preparation options and user settings. These can be selected by pressing the relevant button.
