Installation Guide

Installation instructions
Range hood
Mode: Extraction / Recirculation
DSTS9
1011458-R02
15/03/2016
3
Installation
▸ Carefully insert the hood body 1 in the prepared cut-out
2 (see Dimensions).
▸ For flush installation, level the hood body at the right
height (using spacer set H6.0330).
1
2
▸ Fasten the lower brackets 3 to the housing 5 of hood
body 1 using two screws 4 for each bracket so that the
feet 6 rest on the base of the cabinet.
The brackets can also be rotated for mounting.
1
3
4
6
5
4×
3,5×9,5 mm