Installation Guide

Installation instructions

Range hood

Mode: Extraction / Recirculation

DSTS9

1011458-R02

15/03/2016

▸ Loosely fasten the upper brackets 7 to the housing 5 of

the hood body 1.

The brackets can be adjusted. Push the brackets 7 up and

fasten in place under the worktop 8 using screws 24.

▸ Tighten screws 9 on the housing 5.

Alternatively, the brackets can also be rotated for mounting

so that the hood body can be fastened to the side of the

cabinet.

▸ Level the hood body 1 and secure the brackets 3 to the

base of the cabinet using screws 10.

4x15 mm