Installation Guide

Installation instructions

Range hood

Mode: Extraction / Recirculation

DSTS9

1011458-R02

15/03/2016

▸ Run the connecting cable 11 from the hood body 1 to

the motor housing 12 and plug it into the fan 13.

▸ Lay the cable 11 and fitted with the cable bushing 14

supplied insert into the cable receptacle in the housing

Alternatively, the motor housing 12 can be mounted to the

hood body from the back.

To do this, remove the back cover 21 from the housing 5

and mount at the front.

▸ Insert the connecting cable 11 fitted with the cable bush-

ing 14 into the cable receptacle in the back opening of

the housing 5.