Installation Guide

Installation instructions

Range hood

Mode: Extraction / Recirculation

DSTS9

1011458-R02

15/03/2016

▸ Turn the motor housing 13 so that the exhaust connec-

tion 15 points in the desired direction and fasten it to the

housing 5.

4×

3,5×9,5 mm

4×

M4×8 mm

▸ Insert the three connecting cables 16, which exit the

housing from the underside of the range hood 5, into the

corresponding couplings 17 on the underside of the

control unit 18.

Make sure that the connectors engage firmly. Close the

middle connector lock.