Operating instructions

… User settings
27
Type of wash
Special programmes are available for washing with multi-component detergents. First,
the desired type of wash has to be selected and saved. Type of wash is set at
«Standard» at the factory.
The following options are available:
䡲 Bio washing
Alkaline detergent and bleach
– With bio washing, first the alkaline detergent (from compartment II) is added
to the wash and the suds are heated up to 40 °C. Then after around 6 minutes
the bleach (from compartment I) is added.
䡲 Soap washing
Softener and soap detergent
– If the soap washing option is selected, first the softener (from compartment I) is
added to the wash at the start of the programme and then the soap detergent
(from compartment II) is added.
䡲 Standard
One wash component only.
Changing type of wash
A Hold the button depressed for 5 seconds.
– appears in the plain text display.
A Press the button 3×.
– appears in the plain text display (factory setting).
A Press the button repeatedly until the desired setting appears.
A To exit, press button repeatedly until appears in
the plain text display.
This option is only available during programme selection if the desired type of
wash has already been configured.
A Select main programme.
A Press button 2×.
– appears in the plain text display.
Soap washing
Configuration mode
Type of wash Standard
95
Configuration saved