Operating instructions

… Trouble-shooting
50
… appears in the plain text display
… appears in the plain text display
Possible cause Solution
䡲 Water tap is turned off.
䡲 Mesh filter in the water
connection is blocked.
䡲 Interruption in water supply.
䡲 Water pressure is too low.
A Fix the problem or wait until the water supply is
restored.
A Cancel the error message by pressing the
button.
A Restart the programme.
A If the error message appears again, note down
the error number, turn off the water and then
switch off the power supply.
A Call Customer Services.
Possible cause Solution
䡲 There is a leak in the
appliance.
A Turn off the water tap.
A Cancel the error message by pressing the
button.
A Do not interrupt the power supply to the appli-
ance for the next 10 minutes so that the drain
pump can continue to run.
A Call Customer Services.
A9 Check water inlet
F6 read instructions